ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: 1 [2]  All   Go Down

Author Topic: DC Relay in a 70v System?  (Read 11001 times)

Hal Bissinger/COMSYSTEC

  • Full Member
  • ***
  • Offline Offline
  • Posts: 233
    • COMSYSTEC
Re: DC Relay in a 70v System?
« Reply #10 on: August 30, 2019, 10:22:52 PM »

After reviewing all the great posts, I think the best solution would be to add a small amp with the chime module at the amp rack location and run a speaker line from it to two new lobby speakers, which will not put show relay/paging into the new speakers. Also take the line out of this amp and feed into an input on the existing mixer/amp to get the chime signal to all the existing 70v show relay/paging speakers.
Thanks for the great discussion!
I was going to suggest that but I was trying to save you a few bucks!  :) No problem with doing it that way.
-Hal
Logged

Scott Hofmann

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 454
Re: DC Relay in a 70v System?
« Reply #11 on: August 30, 2019, 11:46:51 PM »

I was going to suggest that but I was trying to save you a few bucks!  :) No problem with doing it that way.
-Hal
I was initially trying not to run new speaker cable and get another amplifier, but most of the time the best solution is not the cheapest, as you know!
Logged
Scott Hofmann

brian maddox

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3270
  • HeyYahWon! ttsss! ttsss!
Re: DC Relay in a 70v System?
« Reply #12 on: August 31, 2019, 02:55:15 PM »

I was initially trying not to run new speaker cable and get another amplifier, but most of the time the best solution is not the cheapest, as you know!

I feel like a lot of my conversations here can be summed up...

Me:  I want to do something clever, but kinda lazy/cheap.

PSW:  Don't

Me:  ok
Logged
"It feels wrong to be in the audience.  And it's too peopley!" - Steve Smith

brian maddox
[email protected]
Savannah, GA

'...do not trifle with the affairs of dragons...

       ....for you are crunchy, and taste good with ketchup...'

ProSoundWeb Community

Re: DC Relay in a 70v System?
« Reply #12 on: August 31, 2019, 02:55:15 PM »


Pages: 1 [2]  All   Go Up
 



Site Hosted By Ashdown Technologies, Inc.

Page created in 0.019 seconds with 25 queries.