ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1]   Go Down

Author Topic: Cord Grip Source?  (Read 1320 times)

Jamin Lynch

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1968
  • Corpus Christi, TX.
Cord Grip Source?
« on: August 27, 2019, 03:22:25 pm »

Where's a good place to get a cord grip with mesh? Without breaking the bank

I need one for 6/4 SOOW. About .8od with 1" NPT

Similar to this one

Thanks
Logged
MAGA-Make Audio Great Again

Brian Larson

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 261
Re: Cord Grip Source?
« Reply #1 on: August 27, 2019, 04:12:24 pm »

A good local electric supply would probably have them, although heavily marked up. McMaster Carr has pretty decent prices on them but the good ones are just plain expensive. If you don’t need a large quantity and you know the part number you’re looking for you might find some “new old stock” liquidators on eBay.
Logged

Frank Koenig

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1089
Re: Cord Grip Source?
« Reply #2 on: August 27, 2019, 04:13:20 pm »

Where's a good place to get a cord grip with mesh? Without breaking the bank

I need one for 6/4 SOOW. About .8od with 1" NPT

Similar to this one

Thanks
Try:
https://www.stayonline.com/

I've ordered from them several times. Good service.

Or:

McMaster-Carr, which will not be the cheapest.

--Frank
Logged
"Nature abhors a vacuum tube." -- John Pierce, Bell Labs

Al Forbes

  • Newbie
  • *
  • Offline Offline
  • Posts: 2
Re: Cord Grip Source?
« Reply #3 on: August 27, 2019, 04:36:14 pm »

Where's a good place to get a cord grip with mesh? Without breaking the bank

I need one for 6/4 SOOW. About .8od with 1" NPT

Similar to this one

Thanks

They're called Kellums cord grips. Lots on Ebay, anthough not cheap.
Logged

Steve Litscher

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 526
    • MixMasters Podcast
Re: Cord Grip Source?
« Reply #4 on: August 27, 2019, 04:38:02 pm »

Not sure if this is a good price or not, but I've used this exact model with 6/4 SOOW in the past.

https://www.amazon.com/gp/product/B003B8T65I

**Edit: just realized the NPT is too large... Looks like they do have one with a 1" fitting:

https://www.amazon.com/Leviton-L7505-Straight-Wide-Range-Strain-Relief-700-970/dp/B003B8XB40/

Jamin Lynch

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1968
  • Corpus Christi, TX.
Re: Cord Grip Source?
« Reply #5 on: August 27, 2019, 08:26:52 pm »

Not sure if this is a good price or not, but I've used this exact model with 6/4 SOOW in the past.

https://www.amazon.com/gp/product/B003B8T65I

**Edit: just realized the NPT is too large... Looks like they do have one with a 1" fitting:

https://www.amazon.com/Leviton-L7505-Straight-Wide-Range-Strain-Relief-700-970/dp/B003B8XB40/

Thanks for the tip. I got one coming for a lot less than I've seen anywhere else.
Logged
MAGA-Make Audio Great Again

Stephen Swaffer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2388
Re: Cord Grip Source?
« Reply #6 on: August 28, 2019, 12:51:58 pm »

Crescent lists a Hubbel #073031204 .73-.97 cord 1" KO for $28.00-if you have an account its less.
Logged
Steve Swaffer

Frank Koenig

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1089
Re: Cord Grip Source?
« Reply #7 on: August 28, 2019, 03:43:27 pm »

Crescent lists a Hubbel #073031204 .73-.97 cord 1" KO for $28.00-if you have an account its less.

Stay Online has it for $24 for anyone in onesies. -F
Logged
"Nature abhors a vacuum tube." -- John Pierce, Bell Labs

ProSoundWeb Community

Re: Cord Grip Source?
« Reply #7 on: August 28, 2019, 03:43:27 pm »


Pages: [1]   Go Up
 



Page created in 0.038 seconds with 24 queries.