ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1]   Go Down

Author Topic: DVS not showing up on QL5  (Read 2125 times)

Sam Garner

  • Newbie
  • *
  • Offline Offline
  • Posts: 1
DVS not showing up on QL5
« on: August 19, 2019, 02:59:08 PM »

Hey guys, could use some help. I have a QL5 board. Trying to set up multitrack recording. I attached a video of me walking through it, thought that might help.

https://www.dropbox.com/s/cwibh1fk225q666/2019-08-19%2013.42.17.mov?dl=0
Logged

Ron Bolte

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 98
  • Mmmmm.. ok...
Re: DVS not showing up on QL5
« Reply #1 on: August 19, 2019, 06:20:25 PM »

Your laptop DVS is using a self assigned or “auto” address.  Check in Dante Controller to be sure the QL is doing the same and using a 169. address.  Also, in order to use the redundant connector to connect your laptop, the console has to be setup for “Daisey chain” operation, not “redundant” on the Dante setup page. Until you get the laptop to show up in the online devices list on the console you will be stuck in the mud.
Logged

ProSoundWeb Community

Re: DVS not showing up on QL5
« Reply #1 on: August 19, 2019, 06:20:25 PM »


Pages: [1]   Go Up
 



Site Hosted By Ashdown Technologies, Inc.

Page created in 0.016 seconds with 22 queries.