ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1]   Go Down

Author Topic: Special uses for VOX Mode on an Adam system  (Read 211 times)

Pete Erskine

  • Moderator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1341
    • Best Audio
Special uses for VOX Mode on an Adam system
« on: August 18, 2019, 12:20:41 pm »

VOX control in Adam to eliminate buzz 

Sometimes an input to the ADAM Intercom is a little noisy. 
Here is a way to use the VOX capability to squelch it except when someone actually talks.

The method can also be used for dozens of applications which need to be started with presence of audio...

http://www.bestaudio.com/s/VOX-Control-in-ADAM.jpg
Logged
Pete Erskine
917-750-1134
www.bestaudio.com
peter@bestaudio.com

brian maddox

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2268
  • HeyYahWon! ttsss! ttsss!
Re: Special uses for VOX Mode on an Adam system
« Reply #1 on: August 18, 2019, 02:54:01 pm »

VOX control in Adam to eliminate buzz 

Sometimes an input to the ADAM Intercom is a little noisy. 
Here is a way to use the VOX capability to squelch it except when someone actually talks.

The method can also be used for dozens of applications which need to be started with presence of audio...

http://www.bestaudio.com/s/VOX-Control-in-ADAM.jpg

Cool.  Now i need to think about this for a while to see what other cool things this can do.  But yeah, just quieting down a noisy PL channel is nifty enough.

I'm finding lately that the tolerance level for most production folks for noise on comms is much lower than it used to be.  The proliferation of FS and Bolero as well as HelixNet and Reidel and other digital comms solutions has kinda spoiled everyone.  I had an analog comms situation just last week that was a little noisy, but would not have even been commented on a few years ago.  Sure enough, the production manager started harping on how noisy comms were within 3 seconds of putting on the headset.  Thankfully, my analog comms troubleshooting skills haven't totally left me yet.  :)
Logged
"It feels wrong to be in the audience.  And it's too peopley!" - Steve Smith

brian maddox
bdmaudio@gmail.com

'...do not trifle with the affairs of dragons...

       ....for you are crunchy, and taste good with ketchup...'

ProSoundWeb Community

Re: Special uses for VOX Mode on an Adam system
« Reply #1 on: August 18, 2019, 02:54:01 pm »


Pages: [1]   Go Up
 



Page created in 0.022 seconds with 23 queries.