ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: 1 [2]  All   Go Down

Author Topic: CL5 Output trims question  (Read 3552 times)

Keith Broughton

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3667
  • Toronto
Re: CL5 Output trims question
« Reply #10 on: August 07, 2019, 11:29:41 AM »
Quote
It has a switch for that: +24 dBu or +18 dBu
Where?
Logged
I don't care enough to be apathetic

brian maddox

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3272
  • HeyYahWon! ttsss! ttsss!
Re: CL5 Output trims question
« Reply #11 on: August 07, 2019, 11:51:32 AM »
Quote from: Keith Broughton on August 07, 2019, 11:29:41 AM
Where?

According to the manual... 

"*5. There are switches inside the body to preset the maximum output level."

So either there is a switch inside the mixer to change this, or else there is some personal surgery involved?  Sounds painful either way...
Logged
"It feels wrong to be in the audience.  And it's too peopley!" - Steve Smith

brian maddox
[email protected]
Savannah, GA

'...do not trifle with the affairs of dragons...

       ....for you are crunchy, and taste good with ketchup...'

Keith Broughton

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3667
  • Toronto
Re: CL5 Output trims question
« Reply #12 on: August 08, 2019, 06:37:10 AM »
Quote from: brian maddox on August 07, 2019, 11:51:32 AM
According to the manual... 

"*5. There are switches inside the body to preset the maximum output level."

So either there is a switch inside the mixer to change this, or else there is some personal surgery involved?  Sounds painful either way...
Thanks Brian.
I had skimmed the manual but didn't see the relevant info.
Logged
I don't care enough to be apathetic

ProSoundWeb Community

Re: CL5 Output trims question
« Reply #12 on: August 08, 2019, 06:37:10 AM »

Pages: 1 [2]  All   Go Up
« previous next »
 



Site Hosted By Ashdown Technologies, Inc.

Page created in 0.023 seconds with 25 queries.