Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Mal Brown]

Looking about I’m not seeing a combination of portable and solid.   Height needs to be in the 4’ range.  Budget is a couple of hun tops.  Beginning to think about cutting wood and that is probably a terrible idea ;-)

Still have all fingers and toes, wood like to keep it that way...


And yes, that was intended...

[Scott Holtzman]

Looking about I’m not seeing a combination of portable and solid.   Height needs to be in the 4’ range.  Budget is a couple of hun tops.  Beginning to think about cutting wood and that is probably a terrible idea ;-)

Still have all fingers and toes, wood like to keep it that way...


And yes, that was intended...

They make tripod projector stands.  You can get an AV cart from a school used equipment dealer.  Road case works too in a pinch.  If nice gig toss some black drape over it

[Mark Cadwallader]

Da-Lite makes a couple of nice projector stands. They break down compactly, and are very adjustable for non-level floors.

Projecto-stand models 203 and 425.

[Philip Roberts]

Looking about I’m not seeing a combination of portable and solid.   Height needs to be in the 4’ range.

How large/heavy of projector do you need to support?

Philip

[Jeff Lelko]

How about a 4' stick of box truss with the appropriate base and top plates?  Granted it's a bit bulky in transit, but looks professional and is more than capable of doing the job.

[Craig Hauber]

Looking about I’m not seeing a combination of portable and solid.   Height needs to be in the 4’ range.  Budget is a couple of hun tops.  Beginning to think about cutting wood and that is probably a terrible idea ;-)

Still have all fingers and toes, wood like to keep it that way...


And yes, that was intended...

I like the Screenworks E-Z Fold Equipment tower.
-light, small yet sturdy.  Goes together like a fast-fold screen frame with plywood top and drape cover
Sturdy enough for speakers too and can enclose a sub.

https://www.bhphotovideo.com/c/product/462455-REG/The_Screen_Works_ETF_E_Z_Fold_Equipment_Tower.html

[Tim Hite]

This will mount on any 35mm speaker stand. K&M 26747

I like K&M 26734

[Jonathan Johnson]

If pretty isn't critical, bolt it to the top of a 4' fiberglass stepladder. (Wood ladders tend to not be stiff enough.)

[Rob Spence]

If pretty isn't critical, bolt it to the top of a 4' fiberglass stepladder. (Wood ladders tend to not be stiff enough.)

And then drape the ladder?

[Mal Brown]

Da-Lite makes a couple of nice projector stands. They break down compactly, and are very adjustable for non-level floors.

Projecto-stand models 203 and 425.

Projector-Stand for the win...   One popped up on the Portland, O
R CL and I snagged it.  I think I’m going to dril a hole, dead center and arrange an eye bolt for a 50lb weight.   That should hold it down no matter what...