Had an interesting problem last night. The AXT600 (Spectrum Manager) pushed out, via Showlink, a new frequency to the ADX1 belt pack. Alas, it didn't tell the receiver, and the transmitter was suddenly transmitting on a new, un-monitored frequency. I could look at the receiver and see the battery slowly losing charge, and all the other telemetry items that Showlink carries, but there was no RF activity.
I have: six AD4Q receivers, 22 ADX belt packs and handhelds, two 610 Showlink Tx/Rx units, a Spectrum Manager, chargers, etc., and a robust wired network, using Dante for monitoring on a mixer with a Dante card, and sending analog outputs to the split head.
I "zeroed" everything, put all the ADX1 in slot 1, all the ADX2 in slot 2, named the ADX1 & 2 with unique "names" so I could see which 610 was controlling which Tx, and synced everything manually (Tx to Rx via IR). Thankfully, I ran the timeline on all channels. The timeline right sidebar shows a frequency change at the precise time the audio dropped.
Opinions? Thanks.