ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1]   Go Down

Author Topic: 01V96i and DAW panning  (Read 578 times)

Paul Viapiano

  • Newbie
  • *
  • Offline Offline
  • Posts: 1
01V96i and DAW panning
« on: July 09, 2019, 06:56:15 pm »

Hi all,

I realize this may not be the best place to post this question, so please forgive me...
I'm using an 01V96i as a control surface for Logic Pro 10.4.4 (latest).
Fader control is fine, as is solo, mute, etc...but panning with the Selected Channel pan knob is a mystery. When in the Remote Layer with Home lit up, and I press AUX 7, the AUX 7 does not light up. When I depress it, AUX 6 lights up until I lift.

If Home is NOT lit up, and I press AUX 7 and hold it down, the faders move to center and I can control the DAW channel pans from there.

What am I missing or have set up wrong? I can never get the AUX 7 to light uo and stay lit or use the rotary Pan knob...shouldn't I be able to do this with Home lit and in Remote mode?

Many thanks...Paul

ProSoundWeb Community

01V96i and DAW panning
« on: July 09, 2019, 06:56:15 pm »

Pages: [1]   Go Up

Page created in 0.015 seconds with 19 queries.