Hi all,
I realize this may not be the best place to post this question, so please forgive me...
I'm using an 01V96i as a control surface for Logic Pro 10.4.4 (latest).
Fader control is fine, as is solo, mute, etc...but panning with the Selected Channel pan knob is a mystery. When in the Remote Layer with Home lit up, and I press AUX 7, the AUX 7 does not light up. When I depress it, AUX 6 lights up until I lift.
If Home is NOT lit up, and I press AUX 7 and hold it down, the faders move to center and I can control the DAW channel pans from there.
What am I missing or have set up wrong? I can never get the AUX 7 to light uo and stay lit or use the rotary Pan knob...shouldn't I be able to do this with Home lit and in Remote mode?
Many thanks...Paul
