ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: 1 2 [3]  All   Go Down

Author Topic: Proper splay on QSC K12.2?  (Read 1449 times)

Dave Garoutte

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1870
  • San Rafael, CA
Re: Proper splay on QSC K12.2?
« Reply #20 on: June 26, 2019, 12:07:42 pm »

The local beer garden summer series just upgraded from the K12 to K12.2.  I think it was definitely a sonic improvement.  It actually sounds more like my DSRs, more open upper mids, a bit more transparent.  I'll keep the Yammies.
Logged
Nothing can be made idiot-proof; only idiot resistant.

Events.  Stage, PA, Lighting and Backline rentals.
Chauvet dealer.  Home of the Angler.
Inventor.

Robert Lunceford

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 425
Re: Proper splay on QSC K12.2?
« Reply #21 on: June 26, 2019, 04:16:56 pm »

This "system" has been making the rounds in the FB Pro Sound Disasters group for some time now.  I cannot imagine how terrible that would sound, especially with 3 x 75 degree conical HF horns all interacting poorly.  Please tell me you were making a funny and we all missed it.

Not my system, something I saw on ebay. I do not personally endorse this type of configuration. One of the most ridiculous deployments I have seen. Amazing that anyone would go to the trouble to fabricate hardware for such a deployment.
Logged

Dave Garoutte

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1870
  • San Rafael, CA
Re: Proper splay on QSC K12.2?
« Reply #22 on: June 26, 2019, 06:51:39 pm »

Hey, they're in a line aren't they?  Everyone knows a line array is better.
Logged
Nothing can be made idiot-proof; only idiot resistant.

Events.  Stage, PA, Lighting and Backline rentals.
Chauvet dealer.  Home of the Angler.
Inventor.

Don T. Williams

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 735
  • Midas Pro 1 & 2, M32, dbTech T12, T8, S30, DM12
    • Q Systems Music & Sound
Re: Proper splay on QSC K12.2?
« Reply #23 on: June 26, 2019, 07:40:36 pm »

I just looked at the ebay listing.  The rigging bars look pretty nice, but I wonder what the safe working load limit is?  Again, it isn't a line array and they don't array well in any configuration.  I'm certain it doesn't have an engineer's stamp.   And then I looked at the roof!!!!  Are those lifts rated for 180 lbs?  Or less!  Three K12's with rigging must weigh 150 lbs. by themselves, so with six on the front truss and you have 300 lbs. of speakers alone.  Holy Sh__!
Logged

ProSoundWeb Community

Re: Proper splay on QSC K12.2?
« Reply #23 on: June 26, 2019, 07:40:36 pm »


Pages: 1 2 [3]  All   Go Up
 



Page created in 0.035 seconds with 22 queries.