ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: 1 2 [All]   Go Down

Author Topic: Meyer tweeter array  (Read 21651 times)

duane massey

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1727
Meyer tweeter array
« on: June 12, 2019, 01:04:02 PM »

Does anyone here remember the old Meyer tweeter array?
Logged
Duane Massey
Technician, musician, stubborn old guy
Houston, Texas

John L Nobile

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2658
Re: Meyer tweeter array
« Reply #1 on: June 12, 2019, 01:59:23 PM »

I remember the one I had on my ML3's before I upgraded them. Always gave it a cheesy look.
Logged

duane massey

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1727
Re: Meyer tweeter array
« Reply #2 on: June 12, 2019, 03:56:45 PM »

The one I am thinking of was a handful of piezo horns, cut down slightly and mounted sideways. It's not on their website under discontinued products.
Logged
Duane Massey
Technician, musician, stubborn old guy
Houston, Texas

John L Nobile

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2658
Re: Meyer tweeter array
« Reply #3 on: June 13, 2019, 12:06:32 PM »

The one I am thinking of was a handful of piezo horns, cut down slightly and mounted sideways. It's not on their website under discontinued products.

They probably want to erase all traces of that product :)
Logged

Mac Kerr

  • Old enough to know better
  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 7552
  • Audio Plumber
Re: Meyer tweeter array
« Reply #4 on: June 13, 2019, 12:41:16 PM »

They probably want to erase all traces of that product :)

The only ones I remember were the 3 piezo tweeters in the MSL-3. IIRC they were added after the speaker was introduced.

Mac
Logged

Riley Casey

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2068
  • Wash DC
Re: Meyer tweeter array
« Reply #5 on: June 13, 2019, 04:43:58 PM »

Probably on the same piezo order as the ones they used in the original UPMs

Art Welter

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2203
  • Santa Fe, New Mexico
Re: Meyer tweeter array
« Reply #6 on: June 14, 2019, 01:31:03 PM »

The one I am thinking of was a handful of piezo horns, cut down slightly and mounted sideways. It's not on their website under discontinued products.
Duane,

Sounds more like the Klipsch MTM tweeter array than anything Meyers, though I do remember piezos used in MSL-3 for a short period.

Meyers did have an experimental "long throw" tweeter array using a large amount of dome tweeters with processing to create a virtual point source, but that experiment seems to elude detection on the interwebs now. IIRC, that array was late 20th or early 21st century.

The Klipsch MTM tweeter array topped their 4 way MCM stack, it used 5 piezos (sometimes cut down) in an arc. That series was produced during the latter part of the 1970s through early 1980s.

Art

« Last Edit: June 14, 2019, 01:33:22 PM by Art Welter »
Logged

duane massey

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1727
Re: Meyer tweeter array
« Reply #7 on: June 15, 2019, 12:47:53 AM »

Art, I remember the Klipsch. The meyer I am describing had a handful of piezo 3x6 (?) horns mounted sideways in a curved shape. The edges were cut off, and the whole thing was kid of bizarre. This was probably early 90's, or earlier. I had several conversations with meyer service people, and was always disappointed in the false info they would repeat. If I remember correctly, one of them told me they weren't using normal peizos, but a custom OEM unit.
They also told me that they weren't using Yamaha and JBL drivers at that time......
Logged
Duane Massey
Technician, musician, stubborn old guy
Houston, Texas

Ivan Beaver

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 9534
  • Atlanta GA
Re: Meyer tweeter array
« Reply #8 on: June 15, 2019, 09:51:49 AM »

Art, I remember the Klipsch. The meyer I am describing had a handful of piezo 3x6 (?) horns mounted sideways in a curved shape. The edges were cut off, and the whole thing was kid of bizarre. This was probably early 90's, or earlier. I had several conversations with meyer service people, and was always disappointed in the false info they would repeat. If I remember correctly, one of them told me they weren't using normal peizos, but a custom OEM unit.
They also told me that they weren't using Yamaha and JBL drivers at that time......
Peavey had the same sort of "array" in the project series.

That would have been in the early to mid 80s I remember.
Logged
A complex question is easily answered by a simple-easy to understand WRONG answer!

Ivan Beaver
Danley Sound Labs

PHYSICS- NOT FADS!

duane massey

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1727
Re: Meyer tweeter array
« Reply #9 on: June 15, 2019, 11:56:45 AM »

Ah, the "old days"......
Logged
Duane Massey
Technician, musician, stubborn old guy
Houston, Texas

John L Nobile

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2658
Re: Meyer tweeter array
« Reply #10 on: June 17, 2019, 11:19:41 AM »

I don't recall piezos ever sounding very good. I always thought that the only reason for having them was to claim a 20khz and higher freq response on paper.

Am I wrong???
Logged

Dave Pluke

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1782
  • Northwest GA, USA
    • BIGG GRIN Productions
Re: Meyer tweeter array
« Reply #11 on: June 17, 2019, 11:55:20 AM »

I don't recall piezos ever sounding very good. I always thought that the only reason for having them was to claim a 20khz and higher freq response on paper.

Am I wrong???

Nope!

All they did, IMHO, was to add a little HF static sufficient to fool some ears.

"The Emperor's new high end" for those of us too cheap to buy JBL slots or bullets...

Dave
Logged
...an analog man in a digital world [tm]

Flying direct to nearly everywhere out of ATL

duane massey

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1727
Re: Meyer tweeter array
« Reply #12 on: June 17, 2019, 12:16:57 PM »

I don't recall piezos ever sounding very good. I always thought that the only reason for having them was to claim a 20khz and higher freq response on paper.

Am I wrong???
The small piezos were pretty horrible. The larger ones, if used with a passive network, could be "ok". I still have a small 2-way cabinet with a screw-on horn/piezo, and it works well for a monitor on a small stage. None of them sound good at higher levels.
Logged
Duane Massey
Technician, musician, stubborn old guy
Houston, Texas

Paul G. OBrien

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1393
Re: Meyer tweeter array
« Reply #13 on: June 17, 2019, 08:52:52 PM »

All of the original Motorola piezos were super tweeters and any type of deployment that didn't use them as such ended badly. I used them in a few DIY projects of mine back in the '80s, for home audio apps they delivered a lot more topend than the cone tweeters that were common at the time but they didn't have the power handling capacity to survive PA applications in singles or even doubles. I still have some with holes burned through the piezo element from my first DJ cabs, after blowing these up twice in 2 gigs I substituted regular bullet super tweeters and gained a massive increase in sound quality, instead of everything sounding like frying bacon from moderate drive levels up I could actually discern the difference between ride and crash cymbals and the system had much better dynamic range. Except for the later powerline compression driver versions these things were really only good for lower power levels.
I remember there was a guy down the street with a Traynor or Peavey 2-way system, 15's with the big white horn something like the old Yamaha 4115 but with and separate super tweeter box on top with 8 or 10 piezo units in an arched horizontal array. This system definitely worked better but it still had too much of the frying bacon sound at higher drive levels, I quickly came to dislike this characteristic after switching my own system to proper compression drivers.
Logged

Tim McCulloch

  • SR Forums
  • Hero Member
  • *
  • Offline Offline
  • Posts: 23743
  • Wichita, Kansas USA
Re: Meyer tweeter array
« Reply #14 on: June 20, 2019, 04:45:19 PM »

All of the original Motorola piezos were super tweeters and any type of deployment that didn't use them as such ended badly. I used them in a few DIY projects of mine back in the '80s, for home audio apps they delivered a lot more topend than the cone tweeters that were common at the time but they didn't have the power handling capacity to survive PA applications in singles or even doubles. I still have some with holes burned through the piezo element from my first DJ cabs, after blowing these up twice in 2 gigs I substituted regular bullet super tweeters and gained a massive increase in sound quality, instead of everything sounding like frying bacon from moderate drive levels up I could actually discern the difference between ride and crash cymbals and the system had much better dynamic range. Except for the later powerline compression driver versions these things were really only good for lower power levels.
I remember there was a guy down the street with a Traynor or Peavey 2-way system, 15's with the big white horn something like the old Yamaha 4115 but with and separate super tweeter box on top with 8 or 10 piezo units in an arched horizontal array. This system definitely worked better but it still had too much of the frying bacon sound at higher drive levels, I quickly came to dislike this characteristic after switching my own system to proper compression drivers.

All sizzle, no steak.
Logged
"If you're passing on your way, from Palm Springs to L.A., Give a wave to good ol' Dave, Say hello to progress and goodbye to the Moonlight Motor Inn." - Steve Spurgin, Moonlight Motor Inn

Dennis Wiggins

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 857
Re: Meyer tweeter array
« Reply #15 on: June 23, 2019, 07:05:19 PM »

Peavey had the same sort of "array" in the project series.

That would have been in the early to mid 80s I remember.

I experienced a demo of this in the early-mid 80's, sponsored by Guzzardo Music at a local hotel in Rockford, IL. The "impact" demo last only a few seconds. The midbass/lower midrange (100-600hz) was astounding; the rest was just very loud. I was literally breathless, in a good way.

It did have the piezo tweeter "array" on the top. I think it was called the Project 4.

p.s.>  At the time, I was running what was later called the Project 1 (Mf1-x over Mb2 over Mf1) with 2 CS400s and plug-in crossover cans. My favorite component was the MB-2 as it did what no trap could do.

-Dennis
« Last Edit: June 23, 2019, 07:30:14 PM by Dennis Wiggins »
Logged

Dennis Wiggins

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 857
Re: Meyer tweeter array
« Reply #16 on: June 23, 2019, 07:20:26 PM »

I believe the "array" had 5 of these stacked, for a total of 10 p-drivers.

-D
Logged

Paul Miller

  • Full Member
  • ***
  • Offline Offline
  • Posts: 111
Re: Meyer tweeter array
« Reply #17 on: July 10, 2019, 05:44:57 AM »

Peavey had the same sort of "array" in the project series.

That would have been in the early to mid 80s I remember.

Here's a Reddit post showing several vintage Peavey cabinets including that piezo array.
« Last Edit: July 10, 2019, 06:19:45 AM by Paul Miller »
Logged

Rory Buszka

  • Full Member
  • ***
  • Offline Offline
  • Posts: 105
  • Gearmonger
Re: Meyer tweeter array
« Reply #18 on: August 20, 2019, 01:26:04 PM »

Duane,

Sounds more like the Klipsch MTM tweeter array than anything Meyers, though I do remember piezos used in MSL-3 for a short period.


Purdue's Hall of Music had a portable system of MSL-3s (used for outdoor festival stages and at one time supported on the low end by 650R2s, then later by VT4880s) and I saw/heard the piezos. They were never very good sounding, mainly because of a horrible resonant peak at 6kHz that is the resonance of the PZT disc.

An example (not the Purdue system):
« Last Edit: August 20, 2019, 01:28:56 PM by Rory Buszka »
Logged
Friends don't let friends mix a band from the stage.

The expert in anything was once a beginner.

Brian Bolly

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 672
  • DC/Baltimore and other Major Airports
Re: Meyer tweeter array
« Reply #19 on: August 25, 2019, 02:51:42 PM »

Does anyone here remember the old Meyer tweeter array?
The piezo array disappeared when the MSL-3 turned into the MSL-3A. The (IIRC) XM3 filter was disconnected and the MS2001A driver was fitted in place of the original MS2001N to make it an MSL-3A. As well, on the M3T processor, the TC circuit was supposed to be switched off.
Logged

ProSoundWeb Community

Re: Meyer tweeter array
« Reply #19 on: August 25, 2019, 02:51:42 PM »


Pages: 1 2 [All]   Go Up
 



Site Hosted By Ashdown Technologies, Inc.

Page created in 0.065 seconds with 24 queries.