ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: 1 [2]  All   Go Down

Author Topic: Interfaceing Radio (walkie) to Mixer (PA)  (Read 1107 times)

Pete Erskine

  • Moderator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1395
    • Best Audio
Re: Interfaceing Radio (walkie) to Mixer (PA)
« Reply #10 on: June 09, 2019, 01:38:52 pm »

How are you connecting to the Radio?

Measure output to see if it has any DC when turned on. 
See if radios using side PTT are different. Hand mics might switch DC too.
Block with Non Polarized cap if switched at RX.
Logged
Pete Erskine
917-750-1134
www.bestaudio.com
peter@bestaudio.com

Tim Hite

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 833
    • Bad Quail
Re: Interfaceing Radio (walkie) to Mixer (PA)
« Reply #11 on: June 09, 2019, 05:49:22 pm »

That seems really short. There are outboard compressors, as well. My Presonus ACP 22 goes to 100ms, I'm sure others have even longer attack times.

Could not get this to work, My desk (Studer) only goes to 5ms attack time,

I will try to adjust the radio setting or will try to get them to prerecord the section
« Last Edit: June 19, 2019, 04:08:47 pm by Tim Hite »
Logged
Bad Quail
Sound + Light
Joshua Tree, California
Authorized Dealers for all this stuff

augie propersi

  • Newbie
  • *
  • Offline Offline
  • Posts: 32
Re: Interfaceing Radio (walkie) to Mixer (PA)
« Reply #12 on: June 19, 2019, 08:09:27 am »

I have a request to get live radio (walkie) conversation over the sound system for a que in a show, not a problem with a DI box, the thing is when it receives it starts with a loud thump!

Any thoughts on how to eliminate this?  disabling the PL code or something?

thanks

Problem solved, I build a adapter with a 10uf capacitor and a 100k resistor,

Thanks
Augie
Logged

ProSoundWeb Community

Re: Interfaceing Radio (walkie) to Mixer (PA)
« Reply #12 on: June 19, 2019, 08:09:27 am »


Pages: 1 [2]  All   Go Up
 



Page created in 0.053 seconds with 23 queries.