ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1] 2  All   Go Down

Author Topic: Interfaceing Radio (walkie) to Mixer (PA)  (Read 801 times)

augie propersi

  • Newbie
  • *
  • Offline Offline
  • Posts: 32
Interfaceing Radio (walkie) to Mixer (PA)
« on: June 07, 2019, 07:09:01 pm »

I have a request to get live radio (walkie) conversation over the sound system for a que in a show, not a problem with a DI box, the thing is when it receives it starts with a loud thump!

Any thoughts on how to eliminate this?  disabling the PL code or something?

thanks
Logged

Tim Hite

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 746
    • Bad Quail
Re: Interfaceing Radio (walkie) to Mixer (PA)
« Reply #1 on: June 07, 2019, 09:57:11 pm »

Noise gate with slow attack?

I have a request to get live radio (walkie) conversation over the sound system for a que in a show, not a problem with a DI box, the thing is when it receives it starts with a loud thump!

Any thoughts on how to eliminate this?  disabling the PL code or something?

thanks
Logged
Bad Quail
Sound + Light
Joshua Tree, California
Authorized Dealers for all this stuff

Keith Broughton

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3236
  • Toronto
Re: Interfaceing Radio (walkie) to Mixer (PA)
« Reply #2 on: June 08, 2019, 06:24:50 am »

High pass the channel and try a fast attack and release, hard limiter setting in the channel compressor.
Not sure about the gate. If it doesn't open with the "thump" it seems unlikely to open with the voice.
Logged
I don't care enough to be apathetic

Miguel Dahl

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 380
Re: Interfaceing Radio (walkie) to Mixer (PA)
« Reply #3 on: June 08, 2019, 12:23:02 pm »

Or, if you can. Do it manually? Read off the meters when the "thump" is over, then pull up the fader?
Logged

Tim Hite

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 746
    • Bad Quail
Re: Interfaceing Radio (walkie) to Mixer (PA)
« Reply #4 on: June 08, 2019, 12:34:15 pm »

Set the threshold low enough to open with the voice but let the slow attack catch the pop. Should work fine.

High pass the channel and try a fast attack and release, hard limiter setting in the channel compressor.
Not sure about the gate. If it doesn't open with the "thump" it seems unlikely to open with the voice.
Logged
Bad Quail
Sound + Light
Joshua Tree, California
Authorized Dealers for all this stuff

Pete Erskine

  • Moderator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1355
    • Best Audio
Re: Interfaceing Radio (walkie) to Mixer (PA)
« Reply #5 on: June 08, 2019, 01:13:06 pm »

I have a request to get live radio (walkie) conversation over the sound system for a que in a show, not a problem with a DI box, the thing is when it receives it starts with a loud thump!

Any thoughts on how to eliminate this?  disabling the PL code or something?

thanks

How are you connecting to the Radio?
Logged
Pete Erskine
917-750-1134
www.bestaudio.com
peter@bestaudio.com

Scott Helmke

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1455
Re: Interfaceing Radio (walkie) to Mixer (PA)
« Reply #6 on: June 08, 2019, 04:34:12 pm »

Set the threshold low enough to open with the voice but let the slow attack catch the pop. Should work fine.

Clever - the pop opens the gate, but the gate doesn't open fast enough for the pop to actually be heard.
Logged

augie propersi

  • Newbie
  • *
  • Offline Offline
  • Posts: 32
Re: Interfaceing Radio (walkie) to Mixer (PA)
« Reply #7 on: June 08, 2019, 07:37:00 pm »

How are you connecting to the Radio?
Using a HT1250 radio, earphone out to DI box,

I will try all of the suggestions
Logged

Keith Broughton

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3236
  • Toronto
Re: Interfaceing Radio (walkie) to Mixer (PA)
« Reply #8 on: June 09, 2019, 08:21:07 am »

Set the threshold low enough to open with the voice but let the slow attack catch the pop. Should work fine.
Got me thinking...might try that out for another application I have.
« Last Edit: June 09, 2019, 08:25:00 am by Keith Broughton »
Logged
I don't care enough to be apathetic

augie propersi

  • Newbie
  • *
  • Offline Offline
  • Posts: 32
Re: Interfaceing Radio (walkie) to Mixer (PA)
« Reply #9 on: June 09, 2019, 01:29:40 pm »

Set the threshold low enough to open with the voice but let the slow attack catch the pop. Should work fine.
Could not get this to work, My desk (Studer) only goes to 5ms attack time,

I will try to adjust the radio setting or will try to get them to prerecord the section
Logged

ProSoundWeb Community

Re: Interfaceing Radio (walkie) to Mixer (PA)
« Reply #9 on: June 09, 2019, 01:29:40 pm »


Pages: [1] 2  All   Go Up
 



Page created in 0.03 seconds with 25 queries.