ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1]   Go Down

Author Topic: Fibre connector  (Read 636 times)

Gary Fitzpatrick

  • Full Member
  • ***
  • Offline Offline
  • Posts: 127
  • Fermanagh, Ireland
Fibre connector
« on: May 23, 2019, 05:04:22 pm »

Not strictly audio but for an audio visual system integration

Can anyone tell me what these fibre connectors are?

Sent from my EML-L09 using Tapatalk

Logged
Allen Heath GL2000, EV sx300 over Community pro Subs, EV s-200 monitors, Zeck amplification

John L Nobile

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1795
Re: Fibre connector
« Reply #1 on: May 23, 2019, 05:12:33 pm »

They look like LC connectors to me

Here's a handy guide I keep around for my day gig in IT

http://www.thefoa.org/tech/connID.htm
Logged

Lee Buckalew

  • Classic LAB
  • Hero Member
  • *
  • Offline Offline
  • Posts: 1328
  • St. Louis, MO area
    • Pro Sound Advice, Inc.
Re: Fibre connector
« Reply #2 on: May 23, 2019, 05:16:34 pm »

Not strictly audio but for an audio visual system integration

Can anyone tell me what these fibre connectors are?

Sent from my EML-L09 using Tapatalk

They look like standard duplex LC connectors on Multi-Mode 50/125 fiber. 

Lee
Logged
Lee Buckalew
Pro Sound Advice, Inc.

Erik Jerde

  • Classic LAB
  • Hero Member
  • *
  • Offline Offline
  • Posts: 846
Re: Fibre connector
« Reply #3 on: May 23, 2019, 05:38:30 pm »

Not strictly audio but for an audio visual system integration

Can anyone tell me what these fibre connectors are?

Sent from my EML-L09 using Tapatalk

The blue cable as has been said above is a duplex multi-mode cable terminated with LC connectors.  If youíre asking about the open port thatís a sfp slot which can take sfps for many different media types (in theory, could be mfgr dependent).
Logged

Gary Fitzpatrick

  • Full Member
  • ***
  • Offline Offline
  • Posts: 127
  • Fermanagh, Ireland
Re: Fibre connector
« Reply #4 on: May 23, 2019, 05:43:55 pm »

Thanks everyone for the replies. I thought from my own research that they were LC multiplex connectors.
There is a spare fibre pair using the same connectors that I want to use for a live video stream but the CCTV company don't want their system online. Thanks again


Sent from my EML-L09 using Tapatalk

Logged
Allen Heath GL2000, EV sx300 over Community pro Subs, EV s-200 monitors, Zeck amplification

Erik Jerde

  • Classic LAB
  • Hero Member
  • *
  • Offline Offline
  • Posts: 846
Re: Fibre connector
« Reply #5 on: May 23, 2019, 07:23:15 pm »

Thanks everyone for the replies. I thought from my own research that they were LC multiplex connectors.
There is a spare fibre pair using the same connectors that I want to use for a live video stream but the CCTV company don't want their system online. Thanks again


Sent from my EML-L09 using Tapatalk

In case it comes up again, most video (SDI at least) uses single mode fiber.  There are converters out there but they are rare.  Getting your head around the different fiber types out there can be tricky at first but itís important.
Logged

ProSoundWeb Community

Re: Fibre connector
¬ę Reply #5 on: May 23, 2019, 07:23:15 pm ¬Ľ


Pages: [1]   Go Up
 



Page created in 0.075 seconds with 24 queries.