ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: 1 [2]  All   Go Down

Author Topic: Dip swich settings  (Read 2103 times)

duane massey

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1542
Re: Dip swich settings
« Reply #10 on: July 25, 2019, 07:54:26 pm »

If you had access to a larger DMX controller you might be able to determine (1) how many channels the unknown fixtures use (2) what the actual channel lineup is. I never assume anything when it comes to fixtures without a manual (or at least a dmx chart) because I have come across just about every possible combination, including blank channels in the middle of a block.
The fixtures could have a master dim channel that has to be set at full, or a strobe channel that has to be at full. The first channel could be a "control" channel, or a master dim channel.
Sometimes it's easier just to walk away.
Logged
Duane Massey
Technician, musician, stubborn old guy
Houston, Texas

ProSoundWeb Community

Re: Dip swich settings
« Reply #10 on: July 25, 2019, 07:54:26 pm »


Pages: 1 [2]  All   Go Up
 



Page created in 0.166 seconds with 24 queries.