ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1]   Go Down

Author Topic: What is a good wall mount option for a 70V speaker?  (Read 576 times)

Steve Crump

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 320
What is a good wall mount option for a 70V speaker?
« on: May 12, 2019, 10:20:28 am »

We prewired a small steakhouse for 7 wall mount 70 volt speakers (2 in the bar, 2 in dining, 1 in waiting and 2 at the outside patio) and now the customer is asking us to purchase and install.
We originally roughed in based on using the EV S Evid 4.2T, but I can't find stock and now the customer is in a hurry. Anyone have a suggestion on a good option? Of course, I can just tell him it is going to take a couple weeks, but still I am curious about other options.
« Last Edit: May 12, 2019, 10:22:49 am by Steve Crump »
Logged

Gary Fitzpatrick

  • Full Member
  • ***
  • Offline Offline
  • Posts: 126
  • Fermanagh, Ireland
Re: What is a good wall mount option for a 70V speaker?
« Reply #1 on: May 12, 2019, 04:21:59 pm »

For this type of install I would normally use the speakers from the Apart Mask range, either 4CT or 6CT.
I have also had good results from the Clever Acoustics BGS or WPS ranges, although I'm not sure on what the availability of clever acoustics is outside of UK and Ireland.

Sent from my EML-L09 using Tapatalk

Logged
Allen Heath GL2000, EV sx300 over Community pro Subs, EV s-200 monitors, Zeck amplification

Caleb Dueck

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 996
Re: What is a good wall mount option for a 70V speaker?
« Reply #2 on: May 12, 2019, 09:47:03 pm »

We prewired a small steakhouse for 7 wall mount 70 volt speakers (2 in the bar, 2 in dining, 1 in waiting and 2 at the outside patio) and now the customer is asking us to purchase and install.
We originally roughed in based on using the EV S Evid 4.2T, but I can't find stock and now the customer is in a hurry. Anyone have a suggestion on a good option? Of course, I can just tell him it is going to take a couple weeks, but still I am curious about other options.

Martin CDD with the asymmetric pattern work great, and sound great. 
Logged
Experience is something you get right after you need it.

Robert Healey

  • Full Member
  • ***
  • Offline Offline
  • Posts: 229
Re: What is a good wall mount option for a 70V speaker?
« Reply #3 on: May 13, 2019, 11:13:08 am »

Martin CDD with the asymmetric pattern work great, and sound great.

CDD5 is nice, but the transformer version is about 1.75x the price of an EVID S4.2T

In the same price range and general sound quality as the EV, look at the QSC AD-S4T.
Logged

Steve Crump

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 320
Re: What is a good wall mount option for a 70V speaker?
« Reply #4 on: May 13, 2019, 11:54:04 am »

Spoke with a vendor this morning and he made a call and found that the 5.2 is in stock and I could have them in a week, so I went that route. I did look at all these options, and in the end I felt the EV was just a good all around option. The JBL CSS-1S/T is out there too, but I could not find where it is listed for outdoor installation.

Thanks for the suggestions.
Logged

Craig Hauber

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 595
  • Mondak Sound Design - Plentywood MT/Grenora ND
Re: What is a good wall mount option for a 70V speaker?
« Reply #5 on: May 13, 2019, 01:31:23 pm »

Spoke with a vendor this morning and he made a call and found that the 5.2 is in stock

Was that a typo on "4.2" or is there a "5.2" model I don't know about yet?

Also look at Klipsch CA-650T, or Sonance PS-S63T, both work good in restaurant jobs -inside or outside.
Logged
Craig Hauber
Mondak Sound Design
-Live PA
-Installs
-Theatre

Steve Crump

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 320
Re: What is a good wall mount option for a 70V speaker?
« Reply #6 on: May 13, 2019, 01:44:45 pm »

Was that a typo on "4.2" or is there a "5.2" model I don't know about yet?

Also look at Klipsch CA-650T, or Sonance PS-S63T, both work good in restaurant jobs -inside or outside.



No typo.

https://www.electrovoice.com/product.php?id=2642
Logged

ProSoundWeb Community

Re: What is a good wall mount option for a 70V speaker?
« Reply #6 on: May 13, 2019, 01:44:45 pm »


Pages: [1]   Go Up
 



Page created in 0.042 seconds with 23 queries.