ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: 1 [2]  All   Go Down

Author Topic: Ethercon to Ethernet Adapter?  (Read 1118 times)

John Penkala

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 498
Re: Ethercon to Ethernet Adapter?
« Reply #10 on: June 29, 2019, 01:00:29 am »

That's slick.  Now just need to find a way to lanyard that shell to the cable so i don't lose one on Every Single Show....

These are not exactly the same, but you won't loose the cap!
https://tmb.com/proshell/
Logged

Tom Bourke

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1566
    • http://www.cwalv.com
Re: Ethercon to Ethernet Adapter?
« Reply #11 on: July 07, 2019, 08:47:51 pm »

Yeah, as you've said by far the simplest way is just to use the ethercon joiner barrel, and on the outgoing side use a small 1m or 2m normal ethernet cable. We do this all the time and works fine.

k
Far better than taking things apart.  Every time we take one apart at work some one loses the ends or the tab gets broken off when the hands pull the cable before it's properly packaged.
Logged
I have a mild form of Dyslexia that affects my ability to spell.  I do use spell checking to help but it does not always work.  My form of Dyslexia does not affect my reading.  Dyslexics of the world untie! <a href="http://www.cwalv.com" target="_blank">http://www.cwalv.com</a>

Jelmer de Jong

  • Full Member
  • ***
  • Offline Offline
  • Posts: 167
Re: Ethercon to Ethernet Adapter?
« Reply #12 on: July 18, 2019, 07:31:46 am »

Logged
Pages: 1 [2]  All   Go Up
 


Page created in 0.036 seconds with 23 queries.