ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1]   Go Down

Author Topic: Limiter Setting iTech 6000  (Read 843 times)

Havard Hogstad

  • Newbie
  • *
  • Offline Offline
  • Posts: 12
Limiter Setting iTech 6000
« on: May 04, 2019, 01:02:00 PM »
If I want to limit the iTech with about 1dB, how should the voltage settings be? I'm running 4 ohm subs in stereo.
Logged

Ivan Beaver

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 9538
  • Atlanta GA
Re: Limiter Setting iTech 6000
« Reply #1 on: May 04, 2019, 08:24:33 PM »
Quote from: Havard Hogstad on May 04, 2019, 01:02:00 PM
If I want to limit the iTech with about 1dB, how should the voltage settings be? I'm running 4 ohm subs in stereo.
Just do the math

Just take the square root of whatever wattage you want x 4 ohms.

If you are talking about 1 dB down from max, you need to determine which wattage vs crest factor vs distortion you are talking about. 

1dB is not really going to offer any limiting protection
Logged
A complex question is easily answered by a simple-easy to understand WRONG answer!

Ivan Beaver
Danley Sound Labs

PHYSICS- NOT FADS!

ProSoundWeb Community

Re: Limiter Setting iTech 6000
« Reply #1 on: May 04, 2019, 08:24:33 PM »

Pages: [1]   Go Up
« previous next »
 



Site Hosted By Ashdown Technologies, Inc.

Page created in 0.031 seconds with 24 queries.