ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1]   Go Down

Author Topic: T Tops for light stands?  (Read 2029 times)

Kevin_Tisdall

  • Full Member
  • ***
  • Offline Offline
  • Posts: 183
  • Milford, CT
T Tops for light stands?
« on: May 01, 2019, 02:15:42 PM »
I have a pair of Odyssey LTP2  12ft tripod stands with T tops and a pair without.  Now I need just two more T Tops for those stands.  Can't seem to search them up anywhere.

Ideas?

--Kevin
Logged

John Fruits

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1004
Re: T Tops for light stands?
« Reply #1 on: May 01, 2019, 05:34:32 PM »
The Odyssey parts store shows this:
https://www.odyssey-parts.com/specific-product-part/ltp2/
Your dealer of choice might be able to get better pricing.
On double checking, not all parts have prices listed, The crossbar MT--0027 is listed but not the MT-0025 T-connector or the MT-0026 V-support arm.  What does Odyssey have to say?
Logged
"The music business is a cruel and shallow money trench, a long plastic hallway where thieves and pimps run free, and good men die like dogs.  There's also a negative side."-Hunter S. Thompson

Mark Cadwallader

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1338
  • Helena, Montana USA
Re: T Tops for light stands?
« Reply #2 on: May 01, 2019, 05:39:29 PM »
A tee-bar assembly is available from Ultimate Support; that might work for you if you can't get the OEM part.
Logged
"Good tools are expensive, but cheap tools are damned expensive."

Kevin_Tisdall

  • Full Member
  • ***
  • Offline Offline
  • Posts: 183
  • Milford, CT
Re: T Tops for light stands?
« Reply #3 on: May 02, 2019, 12:01:31 PM »
Quote from: John Fruits on May 01, 2019, 05:34:32 PM
The Odyssey parts store shows this:
https://www.odyssey-parts.com/specific-product-part/ltp2/
Your dealer of choice might be able to get better pricing.
On double checking, not all parts have prices listed, The crossbar MT--0027 is listed but not the MT-0025 T-connector or the MT-0026 V-support arm.  What does Odyssey have to say?

Thanks for that.  I did look at a parts diagram there then looked up the part and it was listed as "unavailable".    Looking at your link it is available.   I'll order and see how it goes.

Thanks also Mark for the backup suggestion.  If this falls short I'll go there.


--Kevin
Logged

ProSoundWeb Community

Re: T Tops for light stands?
« Reply #3 on: May 02, 2019, 12:01:31 PM »

Pages: [1]   Go Up
« previous next »
 



Site Hosted By Ashdown Technologies, Inc.

Page created in 0.032 seconds with 24 queries.