ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1]   Go Down

Author Topic: Can I access built in Kam programs etc with dmx desk  (Read 1877 times)

David Chapman

  • Newbie
  • *
  • Offline Offline
  • Posts: 2
Can I access built in Kam programs etc with dmx desk
« on: April 27, 2019, 11:37:11 AM »

Hi

I bought Kam Power Partybar 4 a side led lights.  They came with a wireless foot controller Auto/Sound/Colour/Blackout.  It really isn't very responsive, so I bought a dmx desk off ebay.  All I want to do is access the built in Kam programs and chases etc rather than complex programming.  Is this possible or have I bought the wrong thing? It was only £40 so I was hoping it would be simple but it appears not.


Thanks
Logged

Scott Hofmann

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 454
Re: Can I access built in Kam programs etc with dmx desk
« Reply #1 on: April 27, 2019, 12:42:57 PM »

From looking at the manual, appears you have to be in 3-channel DMX mode to access the built-in programs:
Logged
Scott Hofmann

David Chapman

  • Newbie
  • *
  • Offline Offline
  • Posts: 2
Re: Can I access built in Kam programs etc with dmx desk
« Reply #2 on: April 27, 2019, 12:56:21 PM »

Thanks, yes I think I was in 20 channel.  I've changed it to 3 channel and the first 2 sliders seem to change the programs every so many numbers you move them up and channel 3 changes the speed.  I was hoping to have a few buttons to press to get to different programs but at least this is a start!  Thanks for your help!
Logged

Paul G. OBrien

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1393
Re: Can I access built in Kam programs etc with dmx desk
« Reply #3 on: April 27, 2019, 01:13:22 PM »

I was hoping to have a few buttons to press to get to different programs
That's doable. Just put the controller in record mode and save the preset/speed options you want into scenes.
Logged

ProSoundWeb Community

Re: Can I access built in Kam programs etc with dmx desk
« Reply #3 on: April 27, 2019, 01:13:22 PM »


Pages: [1]   Go Up
 



Site Hosted By Ashdown Technologies, Inc.

Page created in 0.033 seconds with 23 queries.