ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1]   Go Down

Author Topic: Spectral crossover across the room  (Read 702 times)

maximiliano estudies

  • Newbie
  • *
  • Offline Offline
  • Posts: 1
Spectral crossover across the room
« on: April 20, 2019, 03:33:59 pm »

I wanted to try out different methods for main + sub alignment. Using Mappxt I started with an easy setup, one subwoofer on the floor and a point source speaker "hanging" 10 meters above. I also decided to do an overlap crossover at 100Hz.

Without doing any filtering or aligning, I get this as a result:





which is not very good. I am using the third microphone (counting from the left) to do the measurements.

After setting the low and high pass filters and aligning the phase at the crossover frequency this is the result:





which is better but I still get some cancellation in the front, between the first and second microphones. This makes sense, as the difference in distance between the loudspeakers changes as we move closer (left in the picture), so the relative arrival times between the speakers also changes and the phase is not aligned anymore.

I figured that I could solve the problem by bringing the speakers closer together, so that the relative distance from the audience to the speakers never allows the phase to go more than 120 apart.

First I tried bringing the top loudspeaker to 7 meters:





and then at 5 meters:





which looks quite ok but, is there another solution to this problem? One that doesn't require to physically move the speakers? In Mappxt is very easy to do, but in the real world is one of the most difficult parameters to change.
Logged

Mac Kerr

  • Old enough to know better
  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 6562
  • Audio Plumber
Posting Rules
« Reply #1 on: April 20, 2019, 03:58:50 pm »

I wanted to try out different methods for main + sub alignment.

Please go to your profile and change the "Name" field to your real first and last name as required by the posting rules displayed in the header at the top of the section, and in the Site Rules and Suggestions in the Forum Announcements section, and on the registration page when you registered.

Mac
admin
Logged

Jean-Pierre Coetzee

  • Classic LAB
  • Hero Member
  • *
  • Offline Offline
  • Posts: 771
  • Gauteng, South Africa
Re: Spectral crossover across the room
« Reply #2 on: April 25, 2019, 07:48:09 am »

A more aggressive crossover, thats literally the only way. You cannot fix a physical problem with electronics. You will always have some sort of issue having two audio sources seperated.

Have a look at this resource from one of our forums members. Will be very useful. You can look at all his other stuff as well, there is a lot to learn there.
Logged
Audio Technician
Word & Life Church

"If you want "loud", then run a piece of sheet metal through a table saw------

If you want "watts"-then plug in a toaster"
- Ivan Beaver

ProSoundWeb Community

Re: Spectral crossover across the room
« Reply #2 on: April 25, 2019, 07:48:09 am »


Pages: [1]   Go Up
 



Page created in 0.053 seconds with 24 queries.