ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1]   Go Down

Author Topic: XLR to 3-pin Lemo pin-out-SK5212-6000?  (Read 242 times)

Ike Zimbel

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 414
  • I'm not a newbie, I just play one on the internet!
    • Zimbel Audio Productions
XLR to 3-pin Lemo pin-out-SK5212-6000?
« on: April 17, 2019, 12:59:59 pm »

Hi All,
Does anyone have the Pin-out to connect a plain-old SM-58 to the Lemo socket on a Sennheiser SK6000 pack?
Thanks!
Logged
~Ike Zimbel~
Wireless frequency coordination specialist.
Manufacturer's Representative (Canada)
Alteros Inc
Radio Active Designs
~416-720-0887~
ca.linkedin.com/pub/ike-zimbel/48/aa1/266

Scott Helmke

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1305
Re: XLR to 3-pin Lemo pin-out-SK5212-6000?
« Reply #1 on: April 18, 2019, 10:16:15 am »

The standard Sennheiser 3-pin Lemo puts ground on pin 1 and audio plus bias on pin 3.

So yeah, there will be DC voltage on an unbalanced input.  You'll want to fit a blocking cap into the XLR.
Logged

Jens Palm Bacher

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 315
    • Lydfabrikken
Re: XLR to 3-pin Lemo pin-out-SK5212-6000?
« Reply #2 on: April 19, 2019, 05:44:57 am »

Hi All,
Does anyone have the Pin-out to connect a plain-old SM-58 to the Lemo socket on a Sennheiser SK6000 pack?
Thanks!
https://sennheiseruk.happyfox.com/kb/article/188-sk-2000-pin-configuration/

You need to make sure the sk 6000 has a recent firmware, where you can force it to use the mic pin and not the Line.
Logged

Ike Zimbel

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 414
  • I'm not a newbie, I just play one on the internet!
    • Zimbel Audio Productions
Re: XLR to 3-pin Lemo pin-out-SK5212-6000?
« Reply #3 on: April 19, 2019, 10:44:59 am »

Hi All,
Does anyone have the Pin-out to connect a plain-old SM-58 to the Lemo socket on a Sennheiser SK6000 pack?
Thanks!
A friend who runs a film sound rental house got back to me with this, which worked perfectly:
"XLR pins 1 and 3 to Lemo pins 1 and 2,
XLR pin 2 through 10uf/10V cap to Lemo pin 3. Positive of cap to Lemo end."
Thanks for the replies! :)
Logged
~Ike Zimbel~
Wireless frequency coordination specialist.
Manufacturer's Representative (Canada)
Alteros Inc
Radio Active Designs
~416-720-0887~
ca.linkedin.com/pub/ike-zimbel/48/aa1/266

Scott Helmke

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1305
Re: XLR to 3-pin Lemo pin-out-SK5212-6000?
« Reply #4 on: April 19, 2019, 05:24:19 pm »

A friend who runs a film sound rental house got back to me with this, which worked perfectly:
"XLR pins 1 and 3 to Lemo pins 1 and 2,
XLR pin 2 through 10uf/10V cap to Lemo pin 3. Positive of cap to Lemo end."
Thanks for the replies! :)

Thanks for following up - this is going in my pinouts file.

Y'all have a pinouts file, don't you? 
Logged

Ike Zimbel

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 414
  • I'm not a newbie, I just play one on the internet!
    • Zimbel Audio Productions
Re: XLR to 3-pin Lemo pin-out-SK5212-6000?
« Reply #5 on: April 20, 2019, 04:42:03 am »

Thanks for following up - this is going in my pinouts file.

Y'all have a pinouts file, don't you?
Yep, I looked there first. No joy. :-[
Logged
~Ike Zimbel~
Wireless frequency coordination specialist.
Manufacturer's Representative (Canada)
Alteros Inc
Radio Active Designs
~416-720-0887~
ca.linkedin.com/pub/ike-zimbel/48/aa1/266

Scott Helmke

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1305
Re: XLR to 3-pin Lemo pin-out-SK5212-6000?
« Reply #6 on: April 20, 2019, 10:22:59 am »

Yep, I looked there first. No joy. :-[

I'm pretty much a hoarder when it comes to pinouts.  *Especially* for ones I might never use again.
Logged
Pages: [1]   Go Up
 


Page created in 0.056 seconds with 22 queries.