ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1] 2  All   Go Down

Author Topic: Covers for DSR112 - found a decent deal  (Read 517 times)

Mark Scrivener

  • Newbie
  • *
  • Offline Offline
  • Posts: 23
Covers for DSR112 - found a decent deal
« on: April 15, 2019, 04:54:36 pm »

I really like the Studio Slips full clam shell covers, but when I went to order some for my new DSR112's, I discovered the price had gone up a bit since last time I ordered. Looking around I found padded Yamaha factory slip over covers (not full clam shell) for $40 at Full Compass.

UPS just delivered mine. They appear well made. Not as thick as the Studio Slips stuff, but should be more than adequate if you are transporting your own gear. Hopefully this is helps some of you.
Logged

Scott Slater

  • Full Member
  • ***
  • Offline Offline
  • Posts: 248
Re: Covers for DSR112 - found a decent deal
« Reply #1 on: April 15, 2019, 05:24:49 pm »

I use QSC carry bags for the KLA-12s for mine.  They fit them well.
Logged

Debbie Dunkley

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4570
  • Central North Carolina
Re: Covers for DSR112 - found a decent deal
« Reply #2 on: April 15, 2019, 05:37:36 pm »

I really like the Studio Slips full clam shell covers, but when I went to order some for my new DSR112's, I discovered the price had gone up a bit since last time I ordered. Looking around I found padded Yamaha factory slip over covers (not full clam shell) for $40 at Full Compass.

UPS just delivered mine. They appear well made. Not as thick as the Studio Slips stuff, but should be more than adequate if you are transporting your own gear. Hopefully this is helps some of you.

I use the Yamaha factory ones too but from new I found them to be too loose. At first I thought they were the wrong ones - perhaps for the 15's but the labels say 12" and I came across others online complaining about the same thing.
I don't mind too much because at least they are not too tight!... and they do the job - they just look a bit weird and the covers move around too easily.

How do yours fit Mark?

I used to use generic Gator speaker bags for them and they worked great but I find bags go very thread bare at the bottom after a while and also that it takes longer to unpack and re- pack them  after the show. A slip cover takes 2 seconds - every second counts !!!
Logged
A young child says to his mother, "Mom, when I grow up I'm going to be a musician." She replies, "Well honey, you know you can't do both."

Mark Scrivener

  • Newbie
  • *
  • Offline Offline
  • Posts: 23
Re: Covers for DSR112 - found a decent deal
« Reply #3 on: April 15, 2019, 06:34:56 pm »

I use the Yamaha factory ones too but from new I found them to be too loose. At first I thought they were the wrong ones - perhaps for the 15's but the labels say 12" and I came across others online complaining about the same thing.
I don't mind too much because at least they are not too tight!... and they do the job - they just look a bit weird and the covers move around too easily.

How do yours fit Mark?

I used to use generic Gator speaker bags for them and they worked great but I find bags go very thread bare at the bottom after a while and also that it takes longer to unpack and re- pack them  after the show. A slip cover takes 2 seconds - every second counts !!!

Mine fit fine, not loose at all. Maybe they listened. At at $40/each, I can't complain! I agree Debbie - every second counts, and anything that reduces load in/out time is a huge plus!
Logged

Luis_Marquez

  • Newbie
  • *
  • Offline Offline
  • Posts: 45
Re: Covers for DSR112 - found a decent deal
« Reply #4 on: April 16, 2019, 02:31:53 am »

I use the Yamaha factory ones too but from new I found them to be too loose. At first I thought they were the wrong ones - perhaps for the 15's but the labels say 12" and I came across others online complaining about the same thing.
I don't mind too much because at least they are not too tight!... and they do the job - they just look a bit weird and the covers move around too easily.

Same here Debbie. Got mine 2 months ago.Over sized, very loose fit also from Full compass. Thought about lining with 1/2 foam for more of a snug fit. When I pulled them out the package they seemed extra large. First thought was this for the 15 model but the handle cutout are in a different location. Wish they were more like the Jbl slip on covers.

« Last Edit: April 16, 2019, 02:37:34 am by Luis_Marquez »
Logged

Jay Marr

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 557
Re: Covers for DSR112 - found a decent deal
« Reply #5 on: April 16, 2019, 08:26:29 am »

Mine fit fine, not loose at all. Maybe they listened. At at $40/each, I can't complain! I agree Debbie - every second counts, and anything that reduces load in/out time is a huge plus!

That's really interesting.  Maybe somebody at Yamaha bought a measuring tape because the older ones from Yamaha fit like a hospital gown.

My bass player bought a set and I would have sworn they were for the 15s.
I have a pair as well so I ordered Tuki clamshell and they fit perfectly.
He can actually put his Yamaha covers OVER my Tuki covers (while on my DSRs).  Cover Covers!

One plus - you can actually keep a XLR and Power cable plugged in and put the Yamaha covers on (during a set break or something if you want dust/rain protection)



Logged

Steve Litscher

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 375
    • 608 Sound and Light
Re: Covers for DSR112 - found a decent deal
« Reply #6 on: April 16, 2019, 01:41:24 pm »

I'm with everyone else... we had 14 DSR112s at one point, 12 sets of Tuki covers, 1 set of factory Yamaha. The hospital gown analogy regarding fit on the factory covers is perfect! Man, those things were loose!

dave briar

  • Full Member
  • ***
  • Offline Offline
  • Posts: 183
  • Helena Montana
Re: Covers for DSR112 - found a decent deal
« Reply #7 on: April 17, 2019, 07:23:37 pm »

My factory DXR12 covers fit perfectly. They are now about five years old.
Logged
..db

Debbie Dunkley

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4570
  • Central North Carolina
Re: Covers for DSR112 - found a decent deal
« Reply #8 on: April 17, 2019, 08:59:24 pm »

My factory DXR12 covers fit perfectly. They are now about five years old.

The DXR covers fit fine. I used to have DXR15's and the covers were really nice - much nicer then the DSR112's. It is the DSR covers that are floppy...
Logged
A young child says to his mother, "Mom, when I grow up I'm going to be a musician." She replies, "Well honey, you know you can't do both."

Dave Garoutte

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1580
  • San Rafael, CA
Re: Covers for DSR112 - found a decent deal
« Reply #9 on: April 18, 2019, 02:35:08 am »

The DXR covers fit fine. I used to have DXR15's and the covers were really nice - much nicer then the DSR112's. It is the DSR covers that are floppy...

Yeah, weird, huh?  I have both. The cheaper speakers have nicer covers.
Logged
Nothing can be made idiot-proof; only idiot resistant.

Events.  Stage, PA, Lighting and Backline rentals.
Chauvet dealer.  Home of the Angler.
Inventor.
Pages: [1] 2  All   Go Up
 


Page created in 0.044 seconds with 23 queries.