ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1]   Go Down

Author Topic: Help identifying this lighting controller  (Read 2284 times)

Tim Barber

  • Full Member
  • ***
  • Offline Offline
  • Posts: 105
  • Eastern Washington State
Help identifying this lighting controller
« on: March 31, 2019, 06:03:11 PM »

Hello all. At my church, the main sanctuary lights are controlled by the box shown in the photo. I'm not sure if it's actually commercial hardware or a custom built thing. No luck with the logo on Google image search, and the box itself has no information at all except what is pictured. I need to find a way to disconnect it temporarily, but want to find out what I'm dealing with first, if possible. Thanks in advance for any tips.
Logged

Mac Kerr

  • Old enough to know better
  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 7551
  • Audio Plumber
Re: Help identifying this lighting controller
« Reply #1 on: March 31, 2019, 06:54:56 PM »

Hello all. At my church, the main sanctuary lights are controlled by the box shown in the photo. I'm not sure if it's actually commercial hardware or a custom built thing. No luck with the logo on Google image search, and the box itself has no information at all except what is pictured. I need to find a way to disconnect it temporarily, but want to find out what I'm dealing with first, if possible. Thanks in advance for any tips.

The logo is for Electronics Diversified Inc. They have been gone as a company since 2009, but there may still be support from whoever  bought them. You can start HERE.

It appears to be a 0-10V controller, and probably has 5 or 6 low voltage control wires behind the panel. See THIS.

Mac
« Last Edit: March 31, 2019, 06:58:42 PM by Mac Kerr »
Logged

Tim Barber

  • Full Member
  • ***
  • Offline Offline
  • Posts: 105
  • Eastern Washington State
Re: Help identifying this lighting controller
« Reply #2 on: March 31, 2019, 08:53:04 PM »

The logo is for Electronics Diversified Inc. They have been gone as a company since 2009, but there may still be support from whoever  bought them. You can start HERE.

It appears to be a 0-10V controller, and probably has 5 or 6 low voltage control wires behind the panel. See THIS.

Mac

Thanks very much Mac, that is very helpful. I appreciate it!
Logged

John Fruits

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1004
Re: Help identifying this lighting controller
« Reply #3 on: March 31, 2019, 09:35:50 PM »

You might find this from ControlBooth.com helpful:
EDI
Logged
"The music business is a cruel and shallow money trench, a long plastic hallway where thieves and pimps run free, and good men die like dogs.  There's also a negative side."-Hunter S. Thompson

Tim Barber

  • Full Member
  • ***
  • Offline Offline
  • Posts: 105
  • Eastern Washington State
Re: Help identifying this lighting controller
« Reply #4 on: March 31, 2019, 10:29:19 PM »

You might find this from ControlBooth.com helpful:
EDI
Thank you John!
Logged

ProSoundWeb Community

Re: Help identifying this lighting controller
« Reply #4 on: March 31, 2019, 10:29:19 PM »


Pages: [1]   Go Up
 



Site Hosted By Ashdown Technologies, Inc.

Page created in 0.031 seconds with 24 queries.