Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Gary Fitzpatrick]

I know this is probably a silly question.

So I got a zero88 Flx S24. I had it set up last night with 4 Showtec Phantom 3R beams. I programmed a few different fx on to the playbacks. Everything worked fine, but when I dropped the playback the light went back to home with every attribute. I was wondering is it possible to set it that when you drop the playback the dimmer drops to zero and the lights just stop where they are instead of returning to home?

Sent from my EML-L09 using Tapatalk

[Mark Cadwallader]

Probably. Your next cue is not to stop playback, but to have your dimmer intensity go to "0" (or whatever that attribute is call on your fixture). Everything else remains the same from a programming standpoint.

[John Fruits]

You might also consider asking this question at a couple of other places.
There is the UK based forum BlueRoom
The forums at Zero88

[ProSoundWeb Community]