ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1] 2  All   Go Down

Author Topic: Question about horn design  (Read 5459 times)

duane massey

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1726
Question about horn design
« on: March 17, 2019, 01:49:29 PM »

In the design of a front-loaded horn (full-size, not vented or tapped horn) what part(s) of the design would be affected by the parameters of the chosen woofer?
Logged
Duane Massey
Technician, musician, stubborn old guy
Houston, Texas

Chris Grimshaw

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1822
  • Sheffield, UK
    • Grimshaw Audio
Re: Question about horn design
« Reply #1 on: March 17, 2019, 04:31:19 PM »

It's important to note that very few bass horns are "full-size". Most end up with compromised mouth size, and rely on multiples working together to increase the mouth area enough to support a flat LF response.

With regards to your question, I'd say the answer is everything. You can't design a horn without a driver, and similarly you can't pick a random driver to go in a horn - you need to find something suitable for the task at hand.

Chris
Logged
Sheffield-based sound engineering.
www.grimshawaudio.com

Ivan Beaver

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 9533
  • Atlanta GA
Re: Question about horn design
« Reply #2 on: March 17, 2019, 08:11:44 PM »

In the design of a front-loaded horn (full-size, not vented or tapped horn) what part(s) of the design would be affected by the parameters of the chosen woofer?
The answer has a lot to do with "What do you want the horn to do?"  and more.  Are you looking for simply gain-over a limited freq range.  Or do you want extension?

The cabinet and driver are selected to work together.

Everything is a compromise, and you are constantly trading one thing for another.

Depending on certain things, a "wimper" woofer could produce better results.



Logged
A complex question is easily answered by a simple-easy to understand WRONG answer!

Ivan Beaver
Danley Sound Labs

PHYSICS- NOT FADS!

duane massey

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1726
Re: Question about horn design
« Reply #3 on: March 18, 2019, 02:12:20 AM »

When we built this massive pair of 20hz horns in the 70's the designer didn't have a particular driver in mind, other than the size. The results were phenomenal, but I was not aware of the details behind his design. Built a few smaller ones in later years, based on his notes about the flare rate and the compression volume, but never really thought about the woofer itself.
How would the driver affect the flare rate? The volume of the compression unit? This is all just out of curiosity on my part, as I will undoubtedly never have the opportunity to build any more of these.
Logged
Duane Massey
Technician, musician, stubborn old guy
Houston, Texas

duane massey

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1726
Re: Question about horn design
« Reply #4 on: March 18, 2019, 02:27:52 AM »

Pic of one of the horns
Logged
Duane Massey
Technician, musician, stubborn old guy
Houston, Texas

John L Nobile

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2658
Re: Question about horn design
« Reply #5 on: March 18, 2019, 10:19:36 AM »

Logged

Jeff Bankston

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2568
Re: Question about horn design
« Reply #6 on: March 22, 2019, 01:53:09 AM »

Logged

Michael Thompson

  • Full Member
  • ***
  • Offline Offline
  • Posts: 169
    • Factor Audio
Re: Question about horn design
« Reply #7 on: March 22, 2019, 02:27:48 AM »

In the design of a front-loaded horn (full-size, not vented or tapped horn) what part(s) of the design would be affected by the parameters of the chosen woofer?

You will probably find more in depth answers to topics like this at diyaudio.com.
Logged

Dave Garoutte

  • Hero Member
  • *****
  • Online Online
  • Posts: 3379
  • San Rafael, CA
Re: Question about horn design
« Reply #8 on: March 22, 2019, 12:44:47 PM »

Logged
Nothing can be made idiot-proof; only idiot resistant.

Events.  Stage, PA, Lighting and Backline rentals.
Chauvet dealer.  Home of the Angler.
Inventor.  And now, Streaming Video!

Keith Broughton

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3667
  • Toronto
Re: Question about horn design
« Reply #9 on: March 23, 2019, 07:06:09 AM »

Hornografic images.
Good one ;D
From my limited understanding of straight horn design, I would think that in low frequency applications, it's the back loading of the driver that has more impact on what driver parameters are required.
Logged
I don't care enough to be apathetic

ProSoundWeb Community

Re: Question about horn design
« Reply #9 on: March 23, 2019, 07:06:09 AM »


Pages: [1] 2  All   Go Up
 



Site Hosted By Ashdown Technologies, Inc.

Page created in 0.045 seconds with 22 queries.