Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[John Sulek]

That makes a lot of sense. That raises the next question: what are people using for BNC calibration kits? There has to be something out there that's "good enough" and costs less than $1000 (or, ideally, less than $100)?

-Russ

Look at the Array Solutions web site. They have BNC calibration kits for their VNA's in the UHF frequency range.
Complete male/female kit is $120.

[Russell Ault]

Look at the Array Solutions web site. They have BNC calibration kits for their VNA's in the UHF frequency range.
Complete male/female kit is $120.

Ordered. Gotta love the amateur community.

-Russ

[Andrew Broughton]

Just got my SVA1015x, but instead of ordering the $400 calibration kit, I thought I'd check here to see if I can get away with something cheaper for simple pass/fail on Coax or antennas?
This thread is a few years old, so is the Array Solutions still the kit that's a better choice than the eBay cheapo kits?
Is this kit the correct 50ohm Load/Short/Open? (It doesn't say on their web site...)
https://www.arraysolutions.com/antenna-analyzers%20/as-pls-nm

[ProSoundWeb Community]