hi is there anyone who has ever controlled two dbx 260 in parallel rs232 in one driveware software.or give DBX 260 id..
Theory:
The Driveware will allow multiple instances of the software to be open.
Each GUI can select which COMport is used.
So maybe on the software end.
On the hardware end you would have to dive into the options menu, but even if the option exists for assignment, some of our serial savvy folks would need to weigh in on if serial devices (connected in parallel) can have different communications from each other.
It is a shame the DBX forums are shut down. Try their tech support (call).