ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: 1 [2]  All   Go Down

Author Topic: Dante compatibility  (Read 1649 times)

Ardingo Scarzella

  • Newbie
  • *
  • Offline Offline
  • Posts: 5
Re: Dante compatibility
« Reply #10 on: January 28, 2019, 03:05:47 am »

First I want to thank you for the time that you are dedicating to help me in finding a solution for my trouble.
May be there is a misunderstanding, iím Not using any WiFi device, my Mikrotick is a wired switch (they call cloud switch no idea why), basically a router wired, but I tested also with a tp-link switch with the same result
Iím desperate :(
Logged

Erik Jerde

  • Classic LAB
  • Hero Member
  • *
  • Offline Offline
  • Posts: 1047
Re: Dante compatibility
« Reply #11 on: January 28, 2019, 07:47:35 am »

First I want to thank you for the time that you are dedicating to help me in finding a solution for my trouble.
May be there is a misunderstanding, iím Not using any WiFi device, my Mikrotick is a wired switch (they call cloud switch no idea why), basically a router wired, but I tested also with a tp-link switch with the same result
Iím desperate :(

Post exact model numbers of the network equipment youíve tried.
Logged

Rob Spence

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3507
  • Boston Metro North/West
    • Lynx Audio Services
Re: Dante compatibility
« Reply #12 on: January 28, 2019, 12:15:33 pm »

You stated no subnet. .??

What ip addresses are used? Is dhcp used?
Which device is desired to be clock master?



Sent from my iPad using Tapatalk Pro
Logged
rob at lynxaudioservices dot com

Dealer for: AKG, Allen & Heath, Ashley, Astatic, Audix, Blue Microphones, CAD, Chauvet, Community, Countryman, Crown, DBX, Electro-Voice, FBT, Furman, Heil, Horizon, Intellistage, JBL, Lab Gruppen, Mid Atlantic, On Stage Stands, Pelican, Peterson Tuners, Presonus, ProCo, QSC, Radial, RCF, Sennheiser, Shure, SKB, Soundcraft, TC Electronics, Telex, Whirlwind and others

ProSoundWeb Community

Re: Dante compatibility
¬ę Reply #12 on: January 28, 2019, 12:15:33 pm ¬Ľ


Pages: 1 [2]  All   Go Up
 



Page created in 0.04 seconds with 23 queries.