ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1]   Go Down

Author Topic: Orcontrol - DMX master controller - error message  (Read 231 times)

Karen MacLean

  • Newbie
  • *
  • Offline Offline
  • Posts: 1
Orcontrol - DMX master controller - error message
« on: January 19, 2019, 06:26:30 pm »

Hi everyone!  I am wondering if anyone knows what an error message like this might mean?  Nothing works on the controller - I've tried turning it off and turning it back on :)

On the "Display Window" this is the message

!!!!!!!!
S01!CK!

thanks in advance!
Logged

Mac Kerr

  • Old enough to know better
  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 6389
  • Audio Plumber
Posting Rules
« Reply #1 on: January 19, 2019, 07:35:41 pm »

Hi everyone!  I am wondering if anyone knows what an error message like this might mean?  Nothing works on the controller - I've tried turning it off and turning it back on :)

Please go to your profile and change the "Name" field to your real first and last name as required by the posting rules displayed in the header at the top of the section, and in the Site Rules and Suggestions in the Forum Announcements section, and on the registration page when you registered.

Mac
admin
Logged

Steve Garris

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1261
Re: Orcontrol - DMX master controller - error message
« Reply #2 on: January 21, 2019, 02:18:13 pm »

Hi everyone!  I am wondering if anyone knows what an error message like this might mean?  Nothing works on the controller - I've tried turning it off and turning it back on :)

On the "Display Window" this is the message

!!!!!!!!
S01!CK!

thanks in advance!

Sounds like a bad board. That is a sub $100 controller. If it's new return it. If not, shop around for something similar. I've seen that type of controller for as little as $50 new.
Logged
Pages: [1]   Go Up
 


Page created in 0.043 seconds with 21 queries.