ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: 1 [2]  All   Go Down

Author Topic: Truss trolley  (Read 1255 times)

Joel T. Glaser

  • Newbie
  • *
  • Offline Offline
  • Posts: 16
Re: Truss trolley
« Reply #10 on: January 06, 2019, 03:52:10 pm »

Looks great Mal ! Be sure to post picks when you're finished.

I started using 4" locking wheels on all my caster plates. Less trouble with rough surfaces (like gravel!). On the other hand, truss shouldn't get to be too heavy.
Logged

Taylor Hall

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 466
Re: Truss trolley
« Reply #11 on: January 07, 2019, 08:56:06 am »

Nice and tidy, looks great!
Logged
There are two ways to do anything:
1) Do it right
2) Do it over until you do it right

Mal Brown

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 605
Re: Truss trolley
« Reply #12 on: January 13, 2019, 07:57:28 pm »

https://www.talkbass.com/threads/diy-truss-trollies.1380868/#post-22197426

rolled all 80 in one trip, solo move.  Going to redesign the layer guides but for the moment, thus is pretty close
Logged
Bass player, sound guy.
Fb Gorge Sound and Light
WillyandNelson.com

Brian Jojade

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1383
    • HappyMac Digital Electronics
Re: Truss trolley
« Reply #13 on: January 21, 2019, 01:17:09 pm »

I just use 2 4 wheel furniture dollies.  They are dirt cheap and work fine.  Having 4 wheels for each end means they can stand on their own vs having to fumble to get the first row attached.  I made up some spacers out of plywood that can set on the dollies as well as between each row of truss, or on top.  Once the stack is done, a simple ratchet strap around the whole mess, and it's ready to go.

Logged
Brian Jojade
Pages: 1 [2]  All   Go Up
 


Page created in 0.054 seconds with 23 queries.