ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1] 2  All   Go Down

Author Topic: mixing manufacturers and half-wave antennas  (Read 768 times)

Kirby Yarbrough

  • SR Forums
  • Sr. Member
  • *
  • Offline Offline
  • Posts: 456
  • Reston, Virginia
mixing manufacturers and half-wave antennas
« on: January 15, 2019, 11:21:30 am »

My church has a couple of low-end EV RE2 receivers to go with a lav and a handheld transmitter.  The receivers came with quarter-wave antennas.  I have a spare set of Audio Technica half-wave antennas for the same frequency band.  In an effort to improve reception, can the AT antennas be used with the EV receivers instead of buying EV half-waves?
Logged

Tim McCulloch

  • SR Forums
  • Hero Member
  • *
  • Offline Offline
  • Posts: 19893
  • Wichita, Kansas USA
Re: mixing manufacturers and half-wave antennas
« Reply #1 on: January 15, 2019, 12:12:37 pm »

Yes. Electromagnetic waves are brand-agnostic.
Logged
"Practicing an art, no matter how well or badly, is a way to make your soul grow, for heaven's sake. Sing in the shower. Dance to the radio. Tell stories. Write a poem to a friend, even a lousy poem. Do it as well as you possible can. You will get an enormous reward. You will have created something."  - Kurt Vonnegut

Kirby Yarbrough

  • SR Forums
  • Sr. Member
  • *
  • Offline Offline
  • Posts: 456
  • Reston, Virginia
Re: mixing manufacturers and half-wave antennas
« Reply #2 on: January 15, 2019, 12:15:15 pm »

Yes. Electromagnetic waves are brand-agnostic.

Your eloquence is as appreciated as the content of your advice.
Logged

Ike Zimbel

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 419
  • I'm not a newbie, I just play one on the internet!
    • Zimbel Audio Productions
Re: mixing manufacturers and half-wave antennas
« Reply #3 on: January 15, 2019, 02:24:15 pm »

Yes. Electromagnetic waves are brand-agnostic.
Yep...however, you might want to not use that term when explaining this to the congregation  ;) Just sayin...
Logged
~Ike Zimbel~
Wireless frequency coordination specialist.
Manufacturer's Representative (Canada)
Alteros Inc
Radio Active Designs
~416-720-0887~
ca.linkedin.com/pub/ike-zimbel/48/aa1/266

Keith Broughton

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3030
  • Toronto
Re: mixing manufacturers and half-wave antennas
« Reply #4 on: January 15, 2019, 03:33:03 pm »

Yep...however, you might want to not use that term when explaining this to the congregation  ;) Just sayin...
Good one Ike  ;D ;D.

Logged
I don't care enough to be apathetic

Tim McCulloch

  • SR Forums
  • Hero Member
  • *
  • Offline Offline
  • Posts: 19893
  • Wichita, Kansas USA
Re: mixing manufacturers and half-wave antennas
« Reply #5 on: January 15, 2019, 06:09:19 pm »

Your eloquence is as appreciated as the content of your advice.

I think I "borrowed" that phrase from Henry Cohen.
Logged
"Practicing an art, no matter how well or badly, is a way to make your soul grow, for heaven's sake. Sing in the shower. Dance to the radio. Tell stories. Write a poem to a friend, even a lousy poem. Do it as well as you possible can. You will get an enormous reward. You will have created something."  - Kurt Vonnegut

Mike Caldwell

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1284
  • Covington, Ohio
    • Mike Caldwell Audio Productions
Re: mixing manufacturers and half-wave antennas
« Reply #6 on: January 16, 2019, 11:46:06 pm »

My church has a couple of low-end EV RE2 receivers to go with a lav and a handheld transmitter.  The receivers came with quarter-wave antennas.  I have a spare set of Audio Technica half-wave antennas for the same frequency band.  In an effort to improve reception, can the AT antennas be used with the EV receivers instead of buying EV half-waves?

No problem using AT antennas on the EV receivers.......except most of the EV wireless receivers I have worked with use a screw on version of the BNC connector not the twist lock version that most everyone else uses.

Ike Zimbel

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 419
  • I'm not a newbie, I just play one on the internet!
    • Zimbel Audio Productions
Re: mixing manufacturers and half-wave antennas
« Reply #7 on: January 17, 2019, 10:15:50 am »

No problem using AT antennas on the EV receivers.......except most of the EV wireless receivers I have worked with use a screw on version of the BNC connector not the twist lock version that most everyone else uses.
That's called a TNC connector, also used on the Telex BTR systems (EV and Telex have the same parent company). You can buy adapters at Digi-Key and other reputable suppliers https://www.digikey.ca/short/p7dwmq
Logged
~Ike Zimbel~
Wireless frequency coordination specialist.
Manufacturer's Representative (Canada)
Alteros Inc
Radio Active Designs
~416-720-0887~
ca.linkedin.com/pub/ike-zimbel/48/aa1/266

Mike Caldwell

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1284
  • Covington, Ohio
    • Mike Caldwell Audio Productions
Re: mixing manufacturers and half-wave antennas
« Reply #8 on: January 17, 2019, 04:48:50 pm »

That's called a TNC connector, also used on the Telex BTR systems (EV and Telex have the same parent company). You can buy adapters at Digi-Key and other reputable suppliers https://www.digikey.ca/short/p7dwmq

While back I had to get a handfull of those to incorporate
some EV wireless into a new distro system.

Don Boomer

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 273
    • RF Venue
Re: mixing manufacturers and half-wave antennas
« Reply #9 on: January 17, 2019, 06:30:38 pm »

  In an effort to improve reception, can the AT antennas be used with the EV receivers instead of buying EV half-waves?

Getting a bit more gain from the half wave antennas may not necessarly improve reception. Can you not get full scale on the RSSI meters?  Maybe you have other issues.

Stronger antennas means they will likey find more junk out there and raise your noise floor.  It all depends. Of course I guess it would also be easy to switch back  ;)
Logged
Don Boomer
RF Venue
Pages: [1] 2  All   Go Up
 


Page created in 0.086 seconds with 23 queries.