Sound Reinforcement - Forums for Live Sound Professionals - Your Displayed Name Must Be Your Real Full Name To Post In The Live Sound Forums > Pro AV Forum

Dante/Cisco Switch

(1/1)

Matt Angle:
Hey,

So I'm running dante secondary over a Cisco SG350 managed switch. 2 vlans. Second vlan used for a different control network. Using ports 25&26 as trunks to link my FOH switch with my stage switch. Both set in the same way.

All works great until I set Ports 25&26 to also be a LAG. I set then to be LAG1. At that point audio stops passing over secondary.

Any ideas why?

Thanks in advance.

M

Mac Kerr:

--- Quote from: Msound248 on January 14, 2019, 06:12:23 pm ---Hey,

So I'm running dante secondary over a Cisco SG350 managed switch.

--- End quote ---

Please go to your profile and change the "Name" field to your real first and last name as required by the posting rules displayed in the header at the top of the section, and in the Site Rules and Suggestions in the Forum Announcements section, and on the registration page when you registered.

Mac
admin

Navigation

[0] Message Index

Go to full version