ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1]   Go Down

Author Topic: Dante/Cisco Switch  (Read 2256 times)

Matt Angle

  • Newbie
  • *
  • Offline Offline
  • Posts: 1
Dante/Cisco Switch
« on: January 14, 2019, 06:12:23 PM »

Hey,

So I'm running dante secondary over a Cisco SG350 managed switch. 2 vlans. Second vlan used for a different control network. Using ports 25&26 as trunks to link my FOH switch with my stage switch. Both set in the same way.

All works great until I set Ports 25&26 to also be a LAG. I set then to be LAG1. At that point audio stops passing over secondary.

Any ideas why?

Thanks in advance.

M
Logged

Mac Kerr

  • Old enough to know better
  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 7551
  • Audio Plumber
Posting Rules
« Reply #1 on: January 14, 2019, 07:31:38 PM »

Hey,

So I'm running dante secondary over a Cisco SG350 managed switch.

Please go to your profile and change the "Name" field to your real first and last name as required by the posting rules displayed in the header at the top of the section, and in the Site Rules and Suggestions in the Forum Announcements section, and on the registration page when you registered.

Mac
admin
Logged

ProSoundWeb Community

Posting Rules
« Reply #1 on: January 14, 2019, 07:31:38 PM »


Pages: [1]   Go Up
 



Site Hosted By Ashdown Technologies, Inc.

Page created in 0.031 seconds with 24 queries.