ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: 1 [2]  All   Go Down

Author Topic: dante io  (Read 1630 times)

Phillip Ivan Pietruschka

  • Newbie
  • *
  • Offline Offline
  • Posts: 46
Re: dante io
« Reply #10 on: January 15, 2019, 04:22:28 pm »

I believe the Ultimo is only limited to 2 x 2 when using at 88.2/96K... at 44.1/48K they are 4 x 4.

Flows, not channels. The upshot being that your four outputs can only be fed from a maximum of two separate devices. The inputs (going to the Dante network) can always be configured as a multicast flow if necessary.

See here: https://www.audinate.com/sites/default/files/datasheets/Dante_Ultimo_11-apr-2018.pdf
« Last Edit: January 15, 2019, 04:29:53 pm by Phillip Ivan Pietruschka »
Logged

ProSoundWeb Community

Re: dante io
« Reply #10 on: January 15, 2019, 04:22:28 pm »


Pages: 1 [2]  All   Go Up
 



Page created in 0.033 seconds with 25 queries.