ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: 1 [2]  All   Go Down

Author Topic: dante io  (Read 3263 times)

Phillip Ivan Pietruschka

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 69
Re: dante io
« Reply #10 on: January 15, 2019, 04:22:28 PM »
Quote from: Steve Anderson on January 15, 2019, 01:52:51 AM
I believe the Ultimo is only limited to 2 x 2 when using at 88.2/96K... at 44.1/48K they are 4 x 4.

Flows, not channels. The upshot being that your four outputs can only be fed from a maximum of two separate devices. The inputs (going to the Dante network) can always be configured as a multicast flow if necessary.

See here: https://www.audinate.com/sites/default/files/datasheets/Dante_Ultimo_11-apr-2018.pdf
« Last Edit: January 15, 2019, 04:29:53 PM by Phillip Ivan Pietruschka »
Logged

ProSoundWeb Community

Re: dante io
« Reply #10 on: January 15, 2019, 04:22:28 PM »

Pages: 1 [2]  All   Go Up
« previous next »
 



Site Hosted By Ashdown Technologies, Inc.

Page created in 0.031 seconds with 25 queries.