ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: 1 2 [All]   Go Down

Author Topic: Totems for movers.  (Read 885 times)

Jason Fultz

  • Newbie
  • *
  • Offline Offline
  • Posts: 22
Totems for movers.
« on: January 07, 2019, 10:56:23 am »

Getting ready to purchase a couple of totems for my larger movers.
Do not have to be Tomcat or Global quality, they will only be used a few times yearly as most of my  stuff gets hung.
Looking for inexpensive ideas. 3 to 5 feet tall is good, just want them off the floor and hate the look of milk crates! Hahahaha
Thanx .
Logged

Jeff Lelko

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1112
  • Cape Canaveral, FL
Re: Totems for movers.
« Reply #1 on: January 07, 2019, 11:24:36 am »

Getting ready to purchase a couple of totems for my larger movers.

How large is large?
Logged

Taylor Hall

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 376
Re: Totems for movers.
« Reply #2 on: January 07, 2019, 11:26:19 am »

Is this a question, a declaration of intent or a classified ad?  ???
Logged
There are two ways to do anything:
1) Do it right
2) Do it over until you do it right

Jason Fultz

  • Newbie
  • *
  • Offline Offline
  • Posts: 22
Re: Totems for movers.
« Reply #3 on: January 07, 2019, 12:41:54 pm »

Is this a question, a declaration of intent or a classified ad?  ???
7r's
Logged

Jason Fultz

  • Newbie
  • *
  • Offline Offline
  • Posts: 22
Re: Totems for movers.
« Reply #4 on: January 07, 2019, 12:42:41 pm »

Is this a question, a declaration of intent or a classified ad?  ???
Intent. Looking for options, thank you.
Logged

Jay Barracato

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1994
  • Solomons, MD
Re: Totems for movers.
« Reply #5 on: January 07, 2019, 01:57:27 pm »

Intent. Looking for options, thank you.
Cedarslink

WWE.cedarslink.com

Sent from my Moto Z (2) using Tapatalk

Logged
Jay Barracato

Jeff Lelko

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1112
  • Cape Canaveral, FL
Re: Totems for movers.
« Reply #6 on: January 07, 2019, 01:59:17 pm »

7r's

That's a lamp, not a fixture.  Details will help here.
Logged

Jason Fultz

  • Newbie
  • *
  • Offline Offline
  • Posts: 22
Re: Totems for movers.
« Reply #7 on: January 07, 2019, 04:13:03 pm »


That's a lamp, not a fixture.  Details will help here.
7r Chinese Sharpy knock offs.
Similar to the Beam 260's talked about in the other thread that's going.
Had pretty good luck with them so far, but I keep them clean and continually checking for maintenance that might pop up.
Ounce of prevention goes a long ways with inexpensive stuff.
Logged

Jeff Lelko

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1112
  • Cape Canaveral, FL
Re: Totems for movers.
« Reply #8 on: January 07, 2019, 05:24:25 pm »

7r Chinese Sharpy knock offs.

That's what I was going to guess, but the 7R lamp is popular these days and didn't want to make any assumptions.  I wouldn't consider these fixtures to be large or heavy, so pretty much anything that can support the ~35 pounds and not tip over should be fine.  Out of curiosity, what's wrong with Global Truss?  From a volumetric standpoint it takes up less space than milk crates, has both base plates and top plates readily available, and generally looks nice - especially with an uplight in it.  It's cheap, too.  What do you normally hang these fixtures from?  Also, how do you transport them?  Many folks set moving lights on road cases, which should be close to your 3ft spec. and wouldn't require any additional equipment. 
Logged

Jason Fultz

  • Newbie
  • *
  • Offline Offline
  • Posts: 22
Re: Totems for movers.
« Reply #9 on: January 07, 2019, 06:22:36 pm »

That's what I was going to guess, but the 7R lamp is popular these days and didn't want to make any assumptions.  I wouldn't consider these fixtures to be large or heavy, so pretty much anything that can support the ~35 pounds and not tip over should be fine.  Out of curiosity, what's wrong with Global Truss?  From a volumetric standpoint it takes up less space than milk crates, has both base plates and top plates readily available, and generally looks nice - especially with an uplight in it.  It's cheap, too.  What do you normally hang these fixtures from?  Also, how do you transport them?  Many folks set moving lights on road cases, which should be close to your 3ft spec. and wouldn't require any additional equipment.
I keep them in their original shipping boxes when transporting them.
I have a 21x21 portable stage that has an aluminum top that raises up it is 8x20 and goes up 14ft. Front and rear decks fold down to form a square with a 8x8 drop that folds off of the back.
Had it built a few years ago got about  18000 invested and just starting to see a good ROI on it last summer season.
But anyways when it was built there are supports for roof every 4ft that we hang them on.
Been using a couple of chairs with the fixtures sitting on a piece of ply strapped down to get them off the floor on each side of the drum riser.
Just fishing to see what's out there.
I found a couple of collapsible ones on AMS that I thought are pretty neat   great for trailer pack.
Logged

Jeff Lelko

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1112
  • Cape Canaveral, FL
Re: Totems for movers.
« Reply #10 on: January 07, 2019, 07:41:13 pm »

I keep them in their original shipping boxes when transporting them.

Why not kill two birds with one stone on this and get some proper roadcases, and then use them for setting fixtures on during the show?  Many people do this, and depending on the show you can often take it even one step further with free advertising when your band/company name or logo is painted on the case.  Sometimes you can get away with that, sometimes itís out of place or not what the customer wants to see.  Your mileage will vary.

I ask about your current hanging solution because if you already own trussing youíll almost certainly want to buy something within family for this to maximize intercompatibility and flexibility, though that doesnít seem to be the case here.

Cases and trussing aside, Iíve seen moving lights on everything from bar stools and instrument stands to assorted IKEA furniture.  Ideally you want the fixture secured to the stand so that it canít tip off or walk its way over the edge.  Hope this helps!
Logged

Jason Fultz

  • Newbie
  • *
  • Offline Offline
  • Posts: 22
Re: Totems for movers.
« Reply #11 on: January 07, 2019, 09:03:33 pm »

Thanks for your input Jeff, it is very good.
It's a matter of growth and needs  first as far as ROI on what I have.
I agree road cases are in order.
I have 4 units now as well as various other pieces I pack around.
Plan on adding more.
Cases will be soon.
Most of my other lighting gear is cased already.
As well as my sound gear.
Logged

Mark Cadwallader

  • Hero Member
  • *****
  • Online Online
  • Posts: 1167
  • Helena, Montana USA
Re: Totems for movers.
« Reply #12 on: January 07, 2019, 09:12:53 pm »

If Global F34 or similar is too pricey, plywood or MDF "stage cubes" may be your answer. 24" or 30" cube, with cut-out handles, painted flat black. Also suitable for water bottles, harmonicas, etc.  Make them strong enough for people to stand upon.  If you have four matching cubes, you can put them together and you have a mini-riser.  YMMV.
Logged
"Good tools are expensive, but cheap tools are damned expensive."

Jason Fultz

  • Newbie
  • *
  • Offline Offline
  • Posts: 22
Re: Totems for movers.
« Reply #13 on: January 07, 2019, 09:44:34 pm »

If Global F34 or similar is too pricey, plywood or MDF "stage cubes" may be your answer. 24" or 30" cube, with cut-out handles, painted flat black. Also suitable for water bottles, harmonicas, etc.  Make them strong enough for people to stand upon.  If you have four matching cubes, you can put them together and you have a mini-riser.  YMMV.
This is a great idea.
I have access to metal and welders also, I can see them doubling as ego boxes.
That's really a good thought.
With a little thought in the engineering I could also design them to fold flat for trailer packing,  or leave them packed in the stage.
Thank you sir!
Logged

Terry Martin

  • Full Member
  • ***
  • Offline Offline
  • Posts: 182
Re: Totems for movers.
« Reply #14 on: January 08, 2019, 11:06:23 am »

Cases work well for this.  The small clubs we play typically donít have room for dead storage, so we made use of two identical trunks for movers. 





Sent from my iPhone using Tapatalk
Logged

Allen Smith

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 78
Re: Totems for movers.
« Reply #15 on: January 09, 2019, 12:28:58 am »

I use mini tripods I purchased off of Amazon.  Totem trusses would have been too cumbersome and way too expensive.  They have worked really well.

https://www.amazon.com/gp/product/B0002DUWWQ/ref=oh_aui_search_detailpage?ie=UTF8&psc=1

https://www.amazon.com/gp/product/B008R0WCUG/ref=oh_aui_search_detailpage?ie=UTF8&psc=1

A couple videos of the show where you can see the stands.
https://www.youtube.com/user/TheHandsaw
Logged

Jason Fultz

  • Newbie
  • *
  • Offline Offline
  • Posts: 22
Re: Totems for movers.
« Reply #16 on: January 09, 2019, 02:24:08 pm »

I use mini tripods I purchased off of Amazon.  Totem trusses would have been too cumbersome and way too expensive.  They have worked really well.

https://www.amazon.com/gp/product/B0002DUWWQ/ref=oh_aui_search_detailpage?ie=UTF8&psc=1

https://www.amazon.com/gp/product/B008R0WCUG/ref=oh_aui_search_detailpage?ie=UTF8&psc=1

A couple videos of the show where you can see the stands.
https://www.youtube.com/user/TheHandsaw
Wow,  that's a great idea also.
I have stock piles of speaker stands.
Logged
Pages: 1 2 [All]   Go Up
 


Page created in 0.054 seconds with 21 queries.