Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[John Luty]

I'm having a problem with rf interference with my AVG  wireless mics . What if anything can I do to stop it  ?

[Jerome Malsack]

It will depend on the location your at, The frequencies being used, and did you get height for line of site along with 1/4 wave spacing on the antenna receiving. 
1/4 wave rule says you will space the antenna to prevent problems.  Receiver one needs to have about 4 to 8 inchs separating it from receiver 2.  The antenna should be the 4 to 8 inchs for a UHF frequency.  VHF is 2 to 5 feet. 

[Ryan Trefethen]

Hi John,

We’d will need to know a bit more info before we can help.

1. AVG must be AKG brand microphone
2. Model
3. Frequency range
4. Description of the problem. If you don’t know technical jargon just a laymen description of what’s happening will suffice.
5. Your location in the world (City,State, Country)
6. Environment you are in (Church, warehouse, club, theater, etc.)

Ryan


Sent from my iPhone using Tapatalk

[John Luty]

Hi John,

We’d will need to know a bit more info before we can help.

1. AVG must be AKG brand microphone
2. Model
3. Frequency range
4. Description of the problem. If you don’t know technical jargon just a laymen description of what’s happening will suffice.
5. Your location in the world (City,State, Country)
6. Environment you are in (Church, warehouse, club, theater, etc.)

Ryan


Sent from my iPhone using Tapatalk

yes AKG WMS40 MINI2 Dual Vocal Handheld Microphone Wireless System
both freg. bands537.5 539.3 ,537.9 540.4 so 4 mics total
the problem is occasional popping
I live in western new York state  pretty rural small town pop 13000
in a small neighborhood bar
thanks for taking the time to help

[Ryan Trefethen]

Those are fixed frequency models.

Does the popping happen on all 4 at the same time? 

Popping on all of them but at different times?

Ryan


Sent from my iPhone using Tapatalk

[John Luty]

Those are fixed frequency models.

Does the popping happen on all 4 at the same time? 

Popping on all of them but at different times?

Ryan
Can't say with 100% certainty but I think it is all of them at different times but it could just be one I will try to pay attention when I use them tomorrow night

Sent from my iPhone using Tapatalk

[John Sulek]

The zip code of the venue where this is happening would enable a check of your frequencies in Wireless Workbench or IAS software.

[John Luty]

The zip code of the venue where this is happening would enable a check of your frequencies in Wireless Workbench or IAS software.

14760

[John Sulek]

14760

Looks good in IAS but without an actual scan from the venue, hard to know what is happening on site.
With all your mics powered off, do the receivers show no rf level?
Then turn each mic on by itself and make sure all the other receiver channels show no rf.

When the popping happens, are the mics deployed on the stage or grouped together side stage or at FOH?

Also check for a loose mic capsule, or loose contacts in a battery compartment. Not rf related but could cause a popping noise.

[Jerome Malsack]

The popping possibly could be static discharge.  If the pop is when changing hands and picking it up ? 

[Jean-Pierre Coetzee]

Is there a his followed by a pop or just a random pop every now and then?

If I remember those have fixed antennas on the receivers, try to have them closer to the performers and also try to get them higher up, preferably above peoples heads.

[Mike Caldwell]

How are they connected to your mixer, XLR or 1/4 plugs into line inputs?

If using XLR connections do you have phantom power turned on to those inputs? If you are using/need phantom power and your mixer only has global phantom power as in all on or off to all channels use the 1/4 inch line inputs if your mixer has them.

What I'm getting at is that some active equipment like mic receivers don't like having their outputs hit with phantom power.

[John Luty]

update the main problem was my mixer the right channel was going add that to the mic frequencies at 537.500 and 537.900and it was a recipe for disaster , spent some money today hopefully no more problems

[Mike Caldwell]

update the main problem was my mixer the right channel was going add that to the mic frequencies at 537.500 and 537.900and it was a recipe for disaster , spent some money today hopefully no more problems

What was your "fix" to the problem, not sure I completely understand
your post.

[Marc Sibilia]

... not sure I completely understand
your post.

Punctuation and capitalization enable communication:

Update. The main problem was my mixer.  The right channel was going.  Add that to the mic frequencies at 537.500 and 537.900 and it was a recipe for disaster.  Spent some money today.  Hopefully no more problems.

[John Luty]

What was your "fix" to the problem, not sure I completely understand
your post.

the "fix " was a new mixer and mics

[Mike Caldwell]

the "fix " was a new mixer and mics

What did you get?

That may have been a broad "shotgun" approach to the problem, but if it worked for you.

[John Luty]

What did you get?

That may have been a broad "shotgun" approach to the problem, but if it worked for you.

I picked up a Yamaha mg10xu mixer and 2 sets of Shure BLX288/PG58 mics , I run a small karaoke show so I didn't need a large mixer and I didn't want to go too expensive on the mics knowing drunks will be using them but at the same time wanted something fairly good
I'm planning on sending my other mixer Peavey PV10 at in to get it fixed giving mea decent backup

[Roland Clarke]

update the main problem was my mixer the right channel was going add that to the mic frequencies at 537.500 and 537.900and it was a recipe for disaster , spent some money today hopefully no more problems

Those frequencies are quite close.  Often if you read the manual, you will find that they will advise you to use one or the other with frequencies this close.  Glad to hear you found a fix, whilst not what any of us want, it sounds that you have learnt a lot from the experience.

[ProSoundWeb Community]