ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: 1 2 [3]  All   Go Down

Author Topic: How cabinets are measured  (Read 5173 times)

Tim McCulloch

  • SR Forums
  • Hero Member
  • *
  • Offline Offline
  • Posts: 22187
  • Wichita, Kansas USA
Re: How cabinets are measured
« Reply #20 on: April 26, 2020, 11:55:13 AM »

Considering setup.  I'll have to play around - will be outside in backyard.  Considering throwing a moving quilt on the lawn and laying cabinets on their backs, measuring from above.  Should be fun, neighbors outta love it.
Thirty five years ago, that's how Community measured their horns and loudspeakers.  The had the measurement mic on a 'fish pole' attached to a TV antenna rotater, all mounted to a 20 ft tower, IIRC.  They gathered the data on a 1/3 octave RTA and took photos of each step.  The data was manually plotted from the screen shots.
"Practicing an art, no matter how well or badly, is a way to make your soul grow, for heaven's sake. Sing in the shower. Dance to the radio. Tell stories. Write a poem to a friend, even a lousy poem. Do it as well as you possible can. You will get an enormous reward. You will have created something."  - Kurt Vonnegut

ProSoundWeb Community

Re: How cabinets are measured
« Reply #20 on: April 26, 2020, 11:55:13 AM »

Pages: 1 2 [3]  All   Go Up

Site Hosted By Ashdown Technologies, Inc.

Page created in 0.031 seconds with 21 queries.