Sound Reinforcement - Forums for Live Sound Professionals - Your Displayed Name Must Be Your Real Full Name To Post In The Live Sound Forums > Installed Sound/Contracting

I need an XLR A/B switch in a wall plate.

(1/3) > >>

Tim Weaver:
I have a paging system that is basically a Shure 577B (think 70's CB radio) plugged into a wall plate. It feeds an in room mixer, but I need a way to add an A/B switch to it so they can page 2 different rooms on the same mic. It would be great if it was A/B/Y, but not strictly necessary.

I'm having trouble finding this item not in a stomp box format.


Little Help?

Scott Hofmann:

--- Quote from: Tim Weaver on December 09, 2018, 09:39:05 am ---I have a paging system that is basically a Shure 577B (think 70's CB radio) plugged into a wall plate. It feeds an in room mixer, but I need a way to add an A/B switch to it so they can page 2 different rooms on the same mic. It would be great if it was A/B/Y, but not strictly necessary.

I'm having trouble finding this item not in a stomp box format.


Little Help?

--- End quote ---
I guess you're looking for something like the SESCOM box, but the switch inside is probably nothing more than a standard DPDT (double pole double throw) toggle switch. You could even get a DPDT center off (on-off-on) version.

Tim Weaver:

--- Quote from: Scott Hofmann on December 09, 2018, 11:07:19 am ---I guess you're looking for something like the SESCOM box, but the switch inside is probably nothing more than a standard DPDT (double pole double throw) toggle switch. You could even get a DPDT center off (on-off-on) version.

--- End quote ---

Yeah, I was just hoping for a more "finished" looking option than what I might fabri-cobble together.

Robert Healey:

--- Quote from: Tim Weaver on December 09, 2018, 12:35:27 pm ---Yeah, I was just hoping for a more "finished" looking option than what I might fabri-cobble together.

--- End quote ---

Could you fit one of these in an extra-deep back box?

https://www.rdlnet.com/downloads/datasheets/stm-2x.pdf

Hal Bissinger/COMSYSTEC:

--- Quote from: Robert Healey on December 09, 2018, 04:25:03 pm ---Could you fit one of these in an extra-deep back box?

https://www.rdlnet.com/downloads/datasheets/stm-2x.pdf
--- End quote ---
Actually you would need two, no? A simple DPDT switch would be easier.

-Hal

Navigation

[0] Message Index

[#] Next page

Go to full version