ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1]   Go Down

Author Topic: iSemcon EMX-7150 mics  (Read 699 times)

Kent Clasen

  • Jr. Member
  • **
  • Online Online
  • Posts: 70
iSemcon EMX-7150 mics
« on: November 24, 2018, 01:00:41 pm »

Anyone use these mics or have other recommendations? I donít need LAB quality precision but having 4 matched mics would be helpful for relative differences when placed around the room. Using with a Roland Octa-pre and Smaart.

http://www.isemcon.net/shopus/product_info.php?products_id=41
Logged

Mark Wilkinson

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 881
Re: iSemcon EMX-7150 mics
« Reply #1 on: November 25, 2018, 04:49:44 pm »


I have one and like it a lot because it can stand high dB, allowing closer distances to speakers when trying to keep reflections out.

It gives me repeatable results...I trust (hope) it's accurate after applying the calibration files...it's the only 'better' mic i have, so nothing to compare to...
Logged

Dave Jones

  • Newbie
  • *
  • Offline Offline
  • Posts: 12
Re: iSemcon EMX-7150 mics
« Reply #2 on: December 06, 2018, 04:49:40 pm »

Anyone use these mics or have other recommendations? I donít need LAB quality precision but having 4 matched mics would be helpful for relative differences when placed around the room. Using with a Roland Octa-pre and Smaart.

http://www.isemcon.net/shopus/product_info.php?products_id=41

I have 3. They are perfectly acceptable. I also have an Earthworks M30 but I rarely take it out as the7150's work fine.

Dave.
Logged
Pages: [1]   Go Up
 


Page created in 0.067 seconds with 21 queries.