ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1]   Go Down

Author Topic: Stage CL faders not working  (Read 3028 times)

joehall

  • Newbie
  • *
  • Offline Offline
  • Posts: 3
Stage CL faders not working
« on: November 19, 2018, 07:13:50 AM »

Hi, i have taken on the lighting for our Christmas panto. The hall has Jands Stage CL lighting console and 6 LED fixtures. I have managed to create scenes and chases, but the faders dont fade, they just go from 0% to 100% (on and off) and no fading at all. Would anyone have any tips of what I am overlooking or need to check?

Thanks
Joe
Logged

Mark Cadwallader

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1338
  • Helena, Montana USA
Re: Stage CL faders not working
« Reply #1 on: November 19, 2018, 03:55:57 PM »

Are the lights running through a dimmer rack?  If so, see if the dimmers are set to "no dim".  Better yet, make sure the dimmers are bypassed for LED fixtures.
Logged
"Good tools are expensive, but cheap tools are damned expensive."

joehall

  • Newbie
  • *
  • Offline Offline
  • Posts: 3
Re: Stage CL faders not working
« Reply #2 on: November 20, 2018, 04:39:22 AM »

Are the lights running through a dimmer rack?  If so, see if the dimmers are set to "no dim".  Better yet, make sure the dimmers are bypassed for LED fixtures.
Hi, ok, I'll have a look at the settings, but when i did i couldn't see anything with that setting, but will have another look tonight. Thanks
Logged

joehall

  • Newbie
  • *
  • Offline Offline
  • Posts: 3
Re: Stage CL faders not working
« Reply #3 on: November 21, 2018, 09:35:28 AM »

i couldn't anything that restricts the dimming, there must be a setting ....
Logged

Tim McCulloch

  • SR Forums
  • Hero Member
  • *
  • Online Online
  • Posts: 23742
  • Wichita, Kansas USA
Re: Stage CL faders not working
« Reply #4 on: November 24, 2018, 11:01:15 AM »

i couldn't anything that restricts the dimming, there must be a setting ....

Dimmers parked at 100%?  That would make them all or nothing...
Logged
"If you're passing on your way, from Palm Springs to L.A., Give a wave to good ol' Dave, Say hello to progress and goodbye to the Moonlight Motor Inn." - Steve Spurgin, Moonlight Motor Inn

Steve Ferreira

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 515
Re: Stage CL faders not working
« Reply #5 on: November 25, 2018, 08:57:39 PM »

Is the grand master set to full on?
Logged

ProSoundWeb Community

Re: Stage CL faders not working
« Reply #5 on: November 25, 2018, 08:57:39 PM »


Pages: [1]   Go Up
 



Site Hosted By Ashdown Technologies, Inc.

Page created in 0.046 seconds with 25 queries.