ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1]   Go Down

Author Topic: A&H ML 4000 giving me fits  (Read 3932 times)

Allan Blackwell

  • Newbie
  • *
  • Offline Offline
  • Posts: 1
A&H ML 4000 giving me fits
« on: October 14, 2018, 03:47:43 am »

I got this console at a killer bargain-basement price, and have for the most part been really happy with it. But lately, I’m having issues with some of the mono input channels. Dropouts, and static (the kind that comes ftom bad connections.) My intentions is to go into the bad channels and replace the “gain” (trim) pots, and also the “pad” and “phase” switches, since these are the first three items with a typical mortality rate. Has anyone else had similar issues, and what was your fix for it? Replacing pots and switches isn’t that difficult. GETTING TO THEM is a pain, and I’d like some level of certainty that I’m making my repairs in the right area. Thanks in advance if you’ve been thru this and have some wisdom to share. 

Chris Grimshaw

  • Hero Member
  • *****
  • Online Online
  • Posts: 1118
  • Sheffield, UK
    • Grimshaw Audio
Re: A&H ML 4000 giving me fits
« Reply #1 on: October 14, 2018, 06:55:09 am »

I have a suspicion that "sw rec" isn't your real name. You're required to display your name on this forum, and are reminded of that on the numerous pages you have to click through to make an account here.

Fix that, then we'll help.

Sheffield-based sound engineering.
Pages: [1]   Go Up

Page created in 0.048 seconds with 23 queries.