ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1]   Go Down

Author Topic: Church Sound: Methods For Doing System Line Checks  (Read 222 times)

M. Erik Matlock

  • Global Moderator
  • Full Member
  • *****
  • Offline Offline
  • Posts: 147
  • Senior Editor Live Sound International/ProSoundWeb
    • ErikMatlock.com
Church Sound: Methods For Doing System Line Checks
« on: November 06, 2018, 02:56:55 pm »

Church Sound: Methods For Doing System Line Checks
One of those things that most sound people know they should do...
By Mike Sessler ē November 6, 2018


The line check. Itís one of those things that most sound people know they should do, or at least would like to have time to do, but often fail to get around to actually doing.

Getting a line check done before the band arrives has saved me on several occasions.

Not getting it done has cost us time (and when I say us, I mean the tech team, the band, the producer and everyone else in the room).

So what is a line check? Just like it sounds, itís a time to check each line from the stage to the soundboard (and back, if you have wired monitors).

There are many ways to do it, and Iíll outline a few here. Whatís really important is that you check each line, from itís beginningóbe that a mic, a DI or instrument cableóto the end, the sound board...

Continue reading here: https://www.prosoundweb.com/channels/church/church_sound_methods_for_doing_system_line_checks/
Logged
This space for rent.
Pages: [1]   Go Up
 


Page created in 0.048 seconds with 19 queries.