ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1]   Go Down

Author Topic: New Sockets for Leviton LEO Ellipsoidal fixture  (Read 1893 times)

David Frost

  • Newbie
  • *
  • Offline Offline
  • Posts: 12
New Sockets for Leviton LEO Ellipsoidal fixture
« on: November 05, 2018, 11:32:26 pm »

It looks like Leviton has discontinued the replacement socket for these fixtures. Does anyone know of a replacement for this socket? It uses a EHG 120V 750 W bulb.
David
Logged

Scott Hofmann

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 308
Re: New Sockets for Leviton LEO Ellipsoidal fixture
« Reply #1 on: November 06, 2018, 09:19:09 am »

It looks like Leviton has discontinued the replacement socket for these fixtures. Does anyone know of a replacement for this socket? It uses a EHG 120V 750 W bulb.
David
Just glancing at the LEO parts diagram, it looks like the actual ceramic socket itself may be a standard one, held in by two machine screws although there is probably a lot of other disassembly required. I would take the lamp cap apart and compare to the Osram 69818 TP-22H pictured below. Be sure to order the one with the long leads attached (part #15 on the LEO exploded view).
« Last Edit: November 18, 2018, 12:12:59 pm by Scott Hofmann »
Logged
Scott Hofmann

ProSoundWeb Community

Re: New Sockets for Leviton LEO Ellipsoidal fixture
« Reply #1 on: November 06, 2018, 09:19:09 am »


Pages: [1]   Go Up
 



Page created in 0.072 seconds with 23 queries.