ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1]   Go Down

Author Topic: transmission, no antenna  (Read 1173 times)

Cliff Fuller

  • Newbie
  • *
  • Offline Offline
  • Posts: 36
transmission, no antenna
« on: October 18, 2018, 02:41:56 PM »

I've got a Telex ST300 Transmitter (hearing impaired system) that seems to transmit just fine with or without an antenna. The channel used is "A", 72.1 MHz. Can someone explain this to me?

Thanks...
Logged

Brian Jojade

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3391
    • HappyMac Digital Electronics
Re: transmission, no antenna
« Reply #1 on: October 19, 2018, 03:01:46 AM »

Think of it like a garden hose.  If you don't put a nozzle on the end, you'll still get water coming out.  It may not go where you want it to, and won't go as far, but it's still coming out.

RF is doing the same thing.  Without an antenna, the little end of the connector is acting as the antenna.  The response is going to be unpredictable, but may be plenty strong if you are nearby.
Logged
Brian Jojade

ProSoundWeb Community

Re: transmission, no antenna
« Reply #1 on: October 19, 2018, 03:01:46 AM »


Pages: [1]   Go Up
 



Site Hosted By Ashdown Technologies, Inc.

Page created in 0.026 seconds with 24 queries.