ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1]   Go Down

Author Topic: Firmware question  (Read 468 times)

Jake Jacobs

  • Newbie
  • *
  • Offline Offline
  • Posts: 2
Firmware question
« on: October 17, 2018, 02:49:52 pm »

Is it unwise to update from Firmware 2.10 straight to 3.09? I recently was appointed Creative arts director at my church and see that the board has v. 2.10. I just want to make sure that updating it directly to 3.09 is safe.

Also - Is there a safe "rollback" in case something goes haywire?
Logged

TJ (Tom) Cornish

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4273
  • St. Paul, MN
Re: Firmware question
« Reply #1 on: October 17, 2018, 03:27:13 pm »

Is it unwise to update from Firmware 2.10 straight to 3.09? I recently was appointed Creative arts director at my church and see that the board has v. 2.10. I just want to make sure that updating it directly to 3.09 is safe.

Also - Is there a safe "rollback" in case something goes haywire?
would be helpful to have some idea what product you are inquiring about.
Logged

Robert Lofgren

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 741
Re: Firmware question
« Reply #2 on: October 17, 2018, 05:59:38 pm »

Those numbers corresponds to the x32.

Yes, you can jump directly to v3.09. It is always best practice to perform a backup of your saved data should something go wrong.

You can revert to 2.x at any time with no special means.
Logged

ProSoundWeb Community

Re: Firmware question
« Reply #2 on: October 17, 2018, 05:59:38 pm »


Pages: [1]   Go Up
 



Page created in 0.05 seconds with 25 queries.