ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1]   Go Down

Author Topic: Tech Topic: A Track Named Impulse Response  (Read 209 times)

M. Erik Matlock

  • Global Moderator
  • Full Member
  • *****
  • Offline Offline
  • Posts: 191
  • Senior Editor Live Sound International/ProSoundWeb
    • ErikMatlock.com
Tech Topic: A Track Named Impulse Response
« on: October 11, 2018, 12:26:51 pm »

Tech Topic: A Track Named Impulse Response
Gaining an intuitive understanding of IR.
By Merlijn van Veen • October 11, 2018


The impulse response, or simply IR, remains an abstract concept to many. But if we think of the impulse response literally as an audio track in a digital audio workstation (DAW) like Pro Tools, Logic or Reaper, it might bring welcome clarity.

Let’s start with Bob McCarthy’s excellent explanation. The impulse response describes the answer to a hypothetical question: “What would this Device Under Test (DUT) look like on an oscilloscope when driven with an (im)pulse?” (Figure 1)

An oscilloscope displays audible sound as alternating current (AC) with positive and negative polarity where the ideal pulse (known as a Dirac pulse) would look like an instantaneous rise followed immediately by a fall without overshoot. It contains every audible frequency, lasting for exactly one cycle, starting at the same time and level...

Continue reading here: https://www.prosoundweb.com/channels/study_hall/tech-topic-a-track-named-impulse-response/
Logged
This space for rent.
Pages: [1]   Go Up
 

Page created in 0.051 seconds with 20 queries.