ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1]   Go Down

Author Topic: JBL MRX system with Crown XTi 4002?  (Read 1279 times)

László Rajzin

  • Newbie
  • *
  • Offline Offline
  • Posts: 7
JBL MRX system with Crown XTi 4002?
« on: October 10, 2018, 04:16:45 PM »

Hi all!

i would like to ask for help:
I have a JBL MRX 515 top, and 2 x 518S sub.
I'm currently using them with crown xti 2000 ,but this feel less dynamic.

I would like to replace it. (Crown xti 2000) -> two Crown XTi 4002 amp.
Crown XTi 4002 for top. /JBL MRX 515/    650w x 650w (8ohm)
Crown XTi 4002 for sub /JBL MRX 518S/   1200w x 1200w (4 ohm)

What are you think about this? Can I use it safely?

I haven't dbx pa...etc.

Regards F.
Logged

Debbie Dunkley

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 6056
  • Central North Carolina
Re: JBL MRX system with Crown XTi 4002?
« Reply #1 on: October 10, 2018, 05:09:55 PM »

Hi all!

i would like to ask for help:
I have a JBL MRX 515 top, and 2 x 518S sub.
I'm currently using them with crown xti 2000 ,but this feel less dynamic.

I would like to replace it. (Crown xti 2000) -> two Crown XTi 4002 amp.
Crown XTi 4002 for top. /JBL MRX 515/    650w x 650w (8ohm)
Crown XTi 4002 for sub /JBL MRX 518S/   1200w x 1200w (4 ohm)

What are you think about this? Can I use it safely?

I haven't dbx pa...etc.

Regards F.

Hi Fulton and welcome.
Before anyone can respond, you will ned to go back and correct your posting name to your real name - it is one of the requirements on this forum. Once that is done, you will receive helpful responses I am sure.
Logged
A young child says to his mother, "Mom, when I grow up I'm going to be a musician." She replies, "Well honey, you know you can't do both."

ProSoundWeb Community

Re: JBL MRX system with Crown XTi 4002?
« Reply #1 on: October 10, 2018, 05:09:55 PM »


Pages: [1]   Go Up
 



Site Hosted By Ashdown Technologies, Inc.

Page created in 0.052 seconds with 24 queries.