ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: 1 [2]  All   Go Down

Author Topic: QL 1/5 monitor mix questions  (Read 918 times)

Kirby Yarbrough

  • SR Forums
  • Sr. Member
  • *
  • Offline Offline
  • Posts: 445
  • Reston, Virginia
Re: QL 1/5 monitor mix questions
« Reply #10 on: October 10, 2018, 01:51:10 pm »

Where is the like button when you need one?

Big thanks Mac.
Logged

Scott Helmke

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1215
Re: QL 1/5 monitor mix questions
« Reply #11 on: October 10, 2018, 03:52:49 pm »

To clear many aux sends quickly, I go to mixer setup, turn them all into fixed mixes, then turn them back to variable mixes.

Doesn't that also change them to post-fade?
Logged

Magnus Högkvist

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 73
Re: QL 1/5 monitor mix questions
« Reply #12 on: October 11, 2018, 11:22:19 am »

Two questions for QL1 / QL5 console drivers:

1. Is there a fast and easy way to 'zero out' a specific mix (e.g., set all channel send levels to that mix to zero)?


Question is, is it zero (0 db) or dead silent zero (∞ db).....
Logged

brian maddox

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1900
  • HeyYahWon! ttsss! ttsss!
Re: QL 1/5 monitor mix questions
« Reply #13 on: October 11, 2018, 08:38:59 pm »

Question is, is it zero (0 db) or dead silent zero (∞ db).....

Had a guy [way back in the analog days] that used to "zero out" the desk by placing every knob at unity since "that means it's having zero effect, so that's zero".  Seriously.  On a 56 input desk with 18 Aux Sends.  Very Bright Guy, but after a few gigs out in the field he was sent back into the Lab where he belonged.
Logged
brian maddox
bdmaudio@gmail.com

'...do not trifle with the affairs of dragons...

       ....for you are crunchy, and taste good with ketchup...'
Pages: 1 [2]  All   Go Up
 


Page created in 0.057 seconds with 21 queries.